Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...

Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...

Helium-Supported Hangar for a Small Solar-Powered Airship
For the IGA Expo '93 the Institute for Statics and Dynamics of Aerospace Structures, University of Stuttgart, together with Stuttgart Solar e.V. developed a solar-powered airship. For...

Wall Relief and Three Dimensional Suspension Sculpture Utilizing Tension and Membrane Structures
The aesthetic concerns and observations on sculptural forms involve tension and membrane structures. In the following discussion, the textile forms, which strongly influenced the more...

The Use of ETFE Foils in Lightweight Roof Constructions
ETFE foils are polymer film sheets which are enclosed in support frames and inflated to provide stable, insulated and transparent roof cushions for lightweight enclosures. This paper describes...

Study on Mechanical Characteristics of Light-weight Complex Structure Composed of a Membrane and a Beam String Structure
This paper aims at studying a new type of Beam String Structure, in which a membrane is used as finishing material. This paper reports on the mechanical characteristics of this structure,...

Seismic Performance and Retrofit of the Golden Gate Bridge
Since its opening in 1937, the Golden Gate Bridge has endured and functions as an important transportation link for Bay Area commerce and commuters. After an earthquake in 1989, T.Y. Lin...

Akashi-Kaikyo Bridge Underconstruction
This paper presents 1) brief history of the survey work, 2) brief description of the physical dimensions and structural system, 3) major studies for the design, 4) development of higher...

Concrete Shells Today
Providing high structural qualities, modern shells using experimental forms will attract new attention due to their limitless repertory. Presented is a new form of construction, instead...

Nonlinear Behavior of Northlight Reinforced Concrete Shells
The behavior of northlight shells is very sensitive to the boundary conditions at the top and bottom edges of the shell. The aim of this paper is to investigate the structural action of...

The Structuring of a New Architectural Landscape
Structure plays an increasingly important role in the language of architecture design. Examples from the 2nd half of the 20th century, including transportation systems and buildings, sport...

Morphology of Reciprocal Frame Three-Dimensional Grillage Structures
This paper is an introduction to the morphology of structures using the Reciprocal Frame (also known as Mandala Dach in Germany) which is a patented three-dimensional beam grillage structural...

Assessing Effects for Disposal Sites off San Francisco
A simple particle tracking model has been used to estimate the size of deposition footprints and transient turbidity effects in the water column resulting from disposal of dredged material...

The Politics of Nuclear-Waste Disposal
Spurred by federal and state legislation recommending local disposal of low-level radioactive nuclear waste, the Illinois-Kentucky Compact announced plans in the mid 1980s to build a disposal...

The Future of the Past: Historic Preservation at the Metropolitan Washington Airports
The historic significance and unique architectural character of Washington National and Washington Dulles International Airports have presented the Metropolitan Washington Airports Authority...

Airport Terminal Design Challenges
In February 1989, the Metropolitan Washington Airports Authority began the process of designing and constructing a new terminal at Washington National Airport to address the needs of its...

Dulles International Airport Construction Challenges
The expansion of the Main Terminal at Dulles International Airport was anticipated and planned for during the original construction of the building in 1962. The most difficult portions...

Utilization of Phosphogypsum-Based Slag Aggregate in Portland Cement and Asphaltic Concrete Mixtures
This study centers around the potential utilization of phosphogypsum-based slag aggregate as a substitute for coarse aggregate in both portland cement and asphaltic concrete surfaces for...

Nighttime Cement Concrete Pavement Replacement Seattle-Tacoma International Airport
Several airfield improvement projects are currently underway at Seattle-Tacoma International Airport (Sea-Tac), many of which are being constructed using cement concrete pavement. Due...

Cost Considerations in Planning Pier Terminals
The deregulation of the air transport economy is gradually leading to the involvement of private developers in airport terminal financing. Even the airports run by government agencies...

 

 

 

 

Return to search