Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...
Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...
What is Computational Hydraulics?
Computational hydraulics deals with methods and techniques for the numerical simulation of water flows in natural or man-made systems with the aid of computers. Flow and transport modeling...
A Lagrangian Model for Surface Buoyant Jets
A model is developed to predict the trajectory of a surface buoyant discharge into a large receiving water body. A Lagrangian approach is used to trace the path of a `control volume' of...
High-Resolution Upwind Schemes for Solving Mass Transport Equation
A fractional-step algorithm is employed to solve the mass transport equation by decomposing the advection-dispersion equation into two portions, pure advection and pure dispersion. High-resolution...
Improved Hydraulic Features of the HEC River Analysis (HEC-RAS)
The Hydrologic Engineering Center (HEC) is in the process of developing a Next Generation (NexGen) of hydrologic engineering software. The goal in the area of river hydraulics is to develop...
MAC3D: Multiblock Numerical Model for Hydraulic Applications
The MAC3D computer code is a three-dimensional numerical model for incompressible flow. To enhance geometric flexibility, it uses multiblock grids, which are composite structured grids...
Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...
Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...
Treatment of Nonhomogeneous Terms in Flow Models
A study of the relative significance and treatment of nonhomogeneous terms in unsteady open-channel flow simulation models has been conducted. The effects of nonhomogeneous terms including...
Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...
Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...
Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...
Verification of a Three-Dimensional Model of Delaware Bay
A three-dimensional numerical hydrodynamic model of Delaware Bay is being developed to assess the impact of deepening the navigation channel from near the mouth of Delaware Bay to the...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...
A Three-Dimensional Numerical Simulation of Seasonal Flow and Salt Transport in the C&D Canal
Two seasonal-scale, three-dimensional hydrodynamic models with salt transport using CH3D-WES were constructed to represent the most critical periods of environmental concern: fishery spawning...
Return to search