Small Diameter Gravity and Pressure Sewers
In communities with low population density or physical features that make conventional gravity sewers inordinately expensive, alternative sewer technologies can be significantly lower...
Lessons to be Learned from Lafayette Tennessee's Small Diameter Sewer System
Lafayette, Tennessee's septic tank effluent, small diameter gravity sewer (SDGS) system is believed to have been the first such project to be funded by the United States Environmental...
Comparison of Storm Water Management for Phoenix and Washington, D.C. Urban Areas
The design criteria, the methods of analyses, and the estimated costs of construction are compared for two storm water management systems in the Phoenix, Arizona and the Washington, D.C....
Computer Based Master Plans Manage Water Resources
Scottsdale is pursuing water and wastewater master planning with the goal of implementing a proactive water resources management policy. To prepare dynamic master plans with the above...
Risk Assessment of Lake Shore Development of Devils Lake, North Dakota
In recent years, the advent of the flood insurance programs has forced developers, financiers, and planners to deal with future high water conditions and associated risks. A reliable method...
Vacuum Sewers: Fundamentals and Design Methods
Vacuum sewer (VS) systems have important advantages over conventional gravity sanitary sewers or septic tank-soil absorption systems when one or more of the following conditions hold:...
Alternating Direction Oxidation Ditches?A Cost Saving Technology from Denmark
A soon to be released EPA report claims that in Denmark, small alternating direction oxidation ditches (ADOD) save as much as 70% of the cost for conventional oxidation ditches. The alternating...
Rock Armouring to Unconventional Breakwaters: The Design Implications for Rock Durability
This paper identifies the need for quantitative durability testing of rock for use on dynamically stable rock armored slopes. The derivation and use of a suite of engineering tests for...
Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...
Implementation and Performance of Berm Breakwater Design at Racine, WI
A large berm-type breakwater has been constructed at the entrance to Racine Harbor, Wisconsin, on the western shore of Lake Michigan. The breakwater is approximately 450 feet long, in...
Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...
Computing in Civil Engineering
Microcomputers to Supercomputers
This book contains papers presented at the Fifth Conference on Computing in Civil Engineering. Computer applications in specific disciplines are covered. These include construction engineering...
Retrospective Look Into Design Challenges of Boston Interceptors
The purpose of this paper is to share with designers and owners a retrospective evaluation of a major sewer system design effort. The process by which a major sewer design project reaches...
Current Developments in Reinsulating/Waterproofing Underground Steam Mains in New York City
The objective of Con Edison's reinsulation project is to develop the materials and technology necessary to reinsulate those steam distribution mains having excessive thermal...
Iowa's Experience with Various Types of Pipe in Natural Gas Service
The Utilities Division, Iowa Department of Commerce, is responsible for the rate, service, and safety regulation of utility companies in the State of Iowa. This paper will summarize a...
Boston's Water Distribution Corrosion Control Program
The Boston Water and Sewer Commission (Commission) was formed in 1977 with a mandate to maintain sound, economical, and efficient systems for water distribution and wastewater collection...
Successful Rehabilitation of Sewers at Hawaii Kai
Two common problems in sanitary sewer deterioration are hydrogen sulfide attack to concrete pipe and structures and infiltration leakage into the system. Within the 100 miles (160 km)...
Comprehensive Rehabilitation Results From Stege Sanitary District
Seven sewer agencies, including Stege Sanitary District, in the East Bay of the San Francisco Bay Area embarked on a 20-year capital improvement program in 1987. The 300 million construction...
Return to search