Characteristics of Flow Pressure Pulsation and Similitude Law of Model
As described in this paper, the characteristics of flow pressure pulsation and similitude law of model are derived from experiments on some prototype dam and serial scales models....
Measurement of Hydraulic and Environmental Effects of Aeration Devices in Douglas Reservoir
The releases from Douglas Reservoir experience periods of low dissolved oxygen (DO) content during the summer months. Tests were conducted during August 1989 to determine the effects of...
Spillway Gates for the El Naranjero Dam in Spain
In June 1986 Zwag Zschokke Wartmann Ltd received the order from Hidroelectrica Espanola S.A. in Madrid, Spain for the design and model testing of 5 radial gates on the 'El...
A Study on Estimation of Aquifer Parameters in Unsteady Seepage Flow
A method which automatically identifies aquifer parameters is proposed in this paper. The aim of this investigations is to estimate transmissivities and storage coefficients of unsteady...
An Acoustic Doppler Discharge-Measurement System
A discharge-measurement system that uses a vessel-mounted acoustic Doppler current profiler has been developed and tested by the U.S. Geological Survey. Discharge measurements using the...
Effects of Turbulence on Price AA Meter Rotors
Field and laboratory studies were conducted during 1988 and 1989 by the U.S. Geological survey to determine the effect of turbulence on the performance of price AA meter rotors. Two different...
Limitation to Standard Parshall Flume Calibrations
Parshall flumes are widely used for metering open channel flows. An inspection of the original study which developed the rating equations indicates that the flumes were not tested for...
Selection of Hole Size for Fluidization Pipes
Two-dimensional fluidization experiments are performed on fine and medium coarse quartz sands at depths of 25.4 and 42 cm. Four supply pipes are used with orifice diameters of 1.587 mm...
Hydrogen Generation from Sea Water by Means of a Metal Hydrolysis Process
Active metals such as magnesium reacted with steam can produce hydrogen. This reduction of water by magnesium or aluminum is a thermodynamically favorable process, however, formation of...
Optimum Removal of Noncondensable Gases for Open Cycle OTEC System
For an open cycle OTEC system the dissolved gases in warm surface seawater are evolved in the flash evaporator. Those behave as noncondensable gases in the condenser and degrade the condensing...
Heat Development and In-Situ Strength of Large Diameter Caissons Made with High-Strength Concrete
The test program essentially consisted of casting two prototype caissons using two different high-strength concretes, measuring internal caisson and adjacent soil temperatures, extracting...
Effects of Physicochemical Factors on Asphalt Aging
A new model for asphalt oxidative aging is presented. The model proposes that the kinetics of low temperature aging in the pavement temperature range is largely governed by physicochemical...
Time-Dependent Behavior of FRP Lintels
This paper describes an experimental investigation into the short-term and long-term behaviors of two types of T-shaped lintels made of fiber-glass reinforced plastic with polyester or...
Accurate Computation of Freezing Index
'Freezing index' (cumulative degree-days below freezing) is used for predicting frost penetration depths and modelling pavement performance. Contour maps which illustrate geographic trends...
Theoretical Prediction of Temperature Distributions in Airfield Runway Pavements Due to Aircraft Operation
The determination of this transient temperature distribution is important in predicting the thermal effects on pavements due to aircraft operation. In this research, heat exchange at the...
Cold Regions Hydrology and Hydraulics
The Cold Regions Hydrology and Hydraulics Monograph is the eighth in a series of monographs prepared by the ASCE Technical Council on Cold Regions Engineering. The book is intended to...
Assessment of Conductors
This paper deals with the mechanical integrity of conductors after several years in service and discusses current innovative conductor designs which benefit the structural designer working...
Review of Composite Analysis Methods for High Temperature Applications
This paper addresses a number of unique problems encountered in the stress analysis of high temperature composite materials. The materials used as structures subjected to temperatures...
Effect of Temperature on the Load-Carrying Capacity of Fiber Glass Reinforced Plastic Beams
This paper describes an experimental investigation into the behavior of two T shaped beams made of fiber glass reinforcement and polyester or vinylester binders. Tests were performed at...
Full-Scale Measurement on Chiba Port Tower
Chiba Port Tower is a tall tower, 125m high, with a rhombus shaped plan. All of the surfaces are covered with half mirror glass. On the top of the tower, a 'Tuned Mass Damper'...
Return to search