Effect of Active Control to Structural Reliability
Most available results in the study of structural reliability deal with idealized mathematical representation of structures. With model supported diagnosis of the structural condition...

Optimizing Economic Returns in Drainage Design
Soil wetness is a limitation to high agricultural productivity in Northern New York (NNY) where some 325,000 ha of cropland require drainage treatment. Drainage is needed for trafficability...

Stochastic Analysis of Seasonal Hydraulic Conductivity
Infiltration data collected by a ring infiltrometer tests, for summer, fall, and spring seasons, were used to determine hydraulic conductivity using Philip's two-term infiltration equation....

Stabilizing Drop Structure by Drainage Modifications
East Drain Terminal Drop Structure is located in East Drain, an open toe drain of Palmetto Bend Dam, in the tide water area of south Texas. The drop structure was threatened by piping...

Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....

Technology Transfer for Projects in South America
Engineering services were provided for three projects in South America. One project was located in the Pampa Region of Argentina and two others in northern Brazil. The projects were: 1)...

Design and Maintenance Factors Affecting Application Uniformity of Low Pressure Center-Pivot Irrigation Systems
Uniformity tests were conducted on 30 center-pivot sprinkler systems installed with one of six different low pressure nozzle types or high pressure impact sprinklers. Well designed and...

Progress Report ARS/SCS Runoff Curve Number Work Group
The Soil Conservation Service (SCS) Runoff Curve Number (RCN) procedure works well as a single event model to estimate design storm runoff volumes from a small agricultural watershed....

Simulation of Runoff and Infiltration of Disturbed Land
Disturbances of land due to human and natural causes change the porosity and hydraulic conductivity of the soil. A simulation model of conjunctive surface-subsurface flows can be used...

Stochastic Simulation and Optimization of Irrigation Canal Network Flows
This paper investigates the effects of parametric and objective uncertainty on simulation and optimal hydraulic design of irrigation canal networks. A model of spatially-varied flow in...

Darcy-Weisbach Roughness Coefficients for Selected Residue Materials
A laboratory study is conducted to measure Darcy-Weisbach roughness coefficients for corn, cotton, peanut, pine needles, sorghum, soybeans, sunflower, and wheat residue. Varying rates...

Calculation of Runoff from Rainfall Using NURP Data
Peak runoff flows and flood hydrographs are important elements in the design of drainage and flood-protection structures. The validity of methods for predicting peak flow from rainfall...

Water's New World
Potential applications of computer automation in the water industry have become increasingly apparent in the last several years. A growing number of water agencies are considering purchasing...

Earthquake Damage Repair and Retrofit of the Seventh St. Terminal Port of Oakland
The October 17, 1989 earthquake resulted in the collapse of the two-level Cypress St. Freeway in Oakland. Television and newspaper coverage revealed the tragic loss of life and property...

A Computational Berthing Model for the Design of Fender Systems
The IRF numerical model has not been widely applied to the design of fender systems although the method has been extensively confirmed by hydraulic model tests and partially verified by...

Model Tests for Expansion of Anaheim Bay Naval Harbor
Modifications to the Anaheim Bay, California, Harbor complex have been proposed to enable larger ships to access the existing wharf for direct loading of ordnance. In addition, new deepwater...

Draft Chapter 2?Planning and Design Guidelines for Small Craft Harbors?Entrance Design and Breakwaters
The paper will present a very preliminary draft of the second chapter of an ASCE manual that is currently being developed. The new manual is entitled Planning and Design Guidelines for...

Two-Dimensional Hydraulic Analysis of the Owensboro Bridge and Approaches
The Kentucky Transportation Cabinet, Department of Highways, is working with the Indiana Department of Transportation and the Federal Highway Administration to plan, design, and construct...

Highway Construction and a Trout Stream Relocation
In 1970, a ten-mile section of Traffic Route 15 in the northern portion of Lycoming County extending into Tioga County was under design as a two-lane limited access highway on four lane...

Analytical Hydraulic Modeling of Road Culverts
This paper summarizes the development of a comprehensive analytical methodology and a computer model capable of simulating a wide range of flow phenomena in road culverts. The new flow...

 

 

 

 

Return to search