Repairing New York's Historic Bridges
The Brooklyn and Manhattan bridges are just two of New York City's venerable structures that are undergoing rehabilitation. Current work on the Brooklyn involves enlarging...
Settlement and Stability of Ocean Disposal Mounds
This study examines the engineering behavior of dredged material disposal mounds in Long Island Sound. The study area is located about eight miles off the coast of New Haven where several...
Plunge Pool Erosion in Cohesive Soils at Two Dams in Kansas
Results of a field study of two plunge pools scoured by horizontal pipe outlets discharging on cohesive channels are analyzed. Formulas for critical tractive shear stress based on plasticity...
Structural Trends in New York City Buildings
This story is based on interviews with some leading structural engineers in New York City. It highlights the major structural trends in building design in that city. Case histories of...
Behavior of Metal Structures
This technical symposium illustrates the various aspects of transfer of information from research results to engineering practice. The papers cover historical technical background, current...
Throgs Neck Bridge: Why Did Its Deck Deteriorate?
Rapid deterioration of the concrete roadway decks of the Throgs Neck Bridge approach viaducts was found to be due to secondary tensile and fatigue stresses brought on by deflection of...
Steel Beats Concrete for Idaho Bridge
As an alternative to prestressed concrete design, the State of Idaho and the Federal Highway Administration encouraged the use of cable-stressed steel girder design for the Bonners Ferry...
Flanged Reinforced Concrete Flexural Members
Design aids in the forms of charts and tables are available for design of reinforced concrete flexural members. Many of these design aids were developed for design of rectangular cross...
Micro-Computer Program: Roof Purlin Design
A micro-computer program is explained in step-by-step manner as a shortcut for biaxial bending design with results in as little as 60 seconds. Biaxial bending requires the consideration...
Engineering and Construction in Tropical and Residual Soils
Thirty-one papers and six invited lectures presented at the specialty conference on engineering and construction in tropical and residual soils are included. The proceedings represent...
Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....
Fiber-Reinforced Concrete Proves Worth for Airport Pavements
Laboratory and field tests indicate that fiber-reinforced concrete has higher flexural and tensile strength, higher impact resistance, and improved resistance to spalling and joint deterioration...
Dynamic Consolidation - Dramatic Way to Strengthen Soil
The dynamic consolidation technique consists basically of dropping a heavy pounder of up to 4 x 104 kg from a height varying between 50 to 148 ft....
Luxury Hotel Features New York's First 8,000-psi Concrete
Designers of New York's $100-million Helmsley Palace Hotel realized significant economies by the use of high-strength concrete to replace structural steel and reduce column...
Sand to Sandstone: Foundation Strengthening with Chemical Grout
A large school in San Francisco, built in 1930, was in need of structural rehabilitation to eliminate earthquake hazards. Founded on loose, windblown fine sand, the footings were subject...
Ontario Writes New Bridge Code
In 1976, Ontario's Ministry of Transportation and Communications decided to write its own bridge design code, breaking away from the AASHTO code, because: (1)It wanted a metric...
Testing Concrete in Place
Although modern concrete construction has developed during the past 60 years, one aspect has remained essentially unchanged�the use of molded cylinders tested in compression to estimate...
Redesigning the Auto: A Key to Solving the U.S. Energy
The automobile is a tremendous consumer of energy. The entire transport sector uses 26% of the energy used in the U.S.�� and half the oil. In fact, the American auto alone consumes one-ninth...
Repair and Strengthening of Old Steel Truss Bridges
During the early 1900's, numerous pin jointed steel bridge trusses were constructed throughout the United States. In the intervening years, these trusses were replaced by...
Prefab Structural Components Solve Expansion Problem
Another story was added onto an existing low-rise building, where soil strength was so low that the new floor had to be built by sinking new columns down to a sounder stratum, placing...
Return to search