Numerical Solution of Transient Closed-Conduit Flow Equations by the Method of Lines Along Characteristics
The method of characteristics has long been considered as a natural technique for solving transient closed-conduit problems. In this paper, by using the concept of the method of lines,...

Two-Dimensional Hydrodynamic Modeling with a Computer Graphics System
For more than a decade various divisions and district offices of the U.S. Army Corps of Engineers have been active in the development of graphic information system databases and computer...

A Simple and Reliable Method For Analysis of Water Supply Distribution
The proposed analysis, may be regarded as a bridge between the practical sample analysis and the optimization model development. From the analysis and observation of water distribution...

Selection of ?x and ?t Computational Steps for Four-Point Implicit Nonlinear Dynamic Routing Models
A major step in a successful application of unsteady flow models based on the numerical (four-point implicit, nonlinear finite-difference) solution of the complete one -dimensional Saint-Venant...

Comparisons Between Experimental and Numerical Studies on Laminar Flow with Tracer Transport
In this paper we present an experimental and an accompanying numerical study of two- and three dimensional transient flow and tracer transport in complex flow systems at low Reynolds numbers....

Comparison of Advective Transport Algorithms with an Application in Suisun Bay, a Sub-Embayment of San Francisco Bay, California
This paper examines the conservative properties of several numerical treatments of the salt conservation equation. Specifically, computationally efficient first and second order Eulerian-Lagrangian...

Mapping Debris-Flow Hazard in Honolulu Using a DEM
A method for mapping hazard posed by debris flows has been developed and applied to an area near Honolulu, Hawaii. The method uses studies of past debris flows to characterize sites of...

The Concept of Local Euler Number as an Aid for Sizing Pitot Tubes
Correlations with drag coefficients enable determining the relations between the form of Pitot tubes and their velocity coefficients. A numerical example is presented to clear the use...

A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...

Recent Developments in Three-Dimensional Numerical Estuarine Models
For a fixed cost, computing power increases 5 to 10 times every five years. The readily available computing resources have inspired new modal formulations and innovative model applications....

Risk and Uncertainty in Flood Damage Reduction Project Design
The recent emphasis on partnership between the Federal government and local sponsors in the development of flood damage reduction projects has promoted considerable interest in the application...

The Courant Number and Unsteady Flow Computation
The Courant number C, the key to unsteady flow computation, is a ratio of physical wave velocity, ?, to computational signal-transmission velocity, ?, i.e., C = ?/?. In this way, it uniquely...

The Seattle Forecast Model: A Tool for Water Resources Management in the Seattle Area
The Seattle Forecast Model, SEAFM, developed by Hydrocomp Inc. for the Seattle Water Department, is an interactive, graphic system for streamflow forecasting and reservoir analysis of...

Galveston Bay 3-D Model Study Channel Deepening Circulation and Salinity Results
The effects of deepening the Houston Ship Channel through the Galveston Bay estuary are predicted using the 3-D finite element numerical model RMA10-WES. The primary concern is the effect...

Composite Space Frame?Experimental/Analytical Study
This paper describes work carried out on a composite space frame system. The system, previously developed for roof construction, comprised a pyramidal arrangement of steel angles and circular...

A New Method from China to Determine Load-Carrying Capacity for CFST Members
The most common research method for CFST (concrete-filled steel tubular) members is to study the behaviors of the steel tube and the core concrete separately, then add them together to...

Replacement Steel Bridges for Motorway Widening
Case studies are presented of new applications of composite construction which offer speedy construction of replacement bridges over existing motorways. Spans of 45 m clear the widened...

Trenchless Diversity Fuels Growth of Construction Activities
This paper describes a variety of trenchless technology methods of reconstructing America's decaying pipeline infrastructure by using minimum and /or 'no-dig processes'. The decay of our...

Pipeline Leak Detection Based on Mass Balance
Current technologies in Supervisory Control and Data Acquisition (SCADA) systems enable pipeline leak detection to be carried out in real time by software-based methods. This paper discusses...

Real World Applications of Pipeline Leak Detection
This paper covers various leak detection methodologies and how they are integrated into the Williams Pipe Line system. Special emphasis is given to the dynamic model method of leak detection...

 

 

 

 

Return to search