Ft. Campbell Airfield Emergency Reconstruction
The air deployment from Fort Campbell, Kentucky to Saudi Arabia in support of Operation Desert Storm in the summer and fall of 1990 involved several hundred C5 and C141 aircraft loaded...
Portland Cement Concrete Apron Pavement Design Study for King Fahd International Airport in Saudi Arabia
The Federal Aviation Administration (FAA) Advisory Circular 150/5320-6C used for design of portland cement concrete (PCC) pavements for airports does not account for the site-specific...
North Ramp Pavement Evaluation/Rehabilitation?Houston Intercontinental Airport
The North Ramp at Houston's Intercontinental Airport is approximately 23 years old and serves Terminals A and B and also serves as a primary taxiway. Prior to having the new international...
Recycling Concrete and Asphalt Pavements Rehabilitation of Runway 18R-36L Orlando International Airport
The subject project consisted of reconstructing an air carrier runway utilizing a concrete keel section with asphalt overlays along the runway edges. Associated taxiways were rehabilitated...
Heavy Aircraft Damage to Rigid Airport Pavements
A theoretical solution is presented for the damage caused by heavy aircraft at the transverse joints in a rigid airport pavement. Large stresses in the subgrade generate significant permanent...
Use of Porous Friction Course to Retard Reflection Cracks in Bituminous Overlays
Porous Friction Courses (PFC) are open-graded, high air void, bituminous mixtures that are applied to pavement surfaces to improve skid resistance. In 1989, PFC was used as an interlayer...
Rehabilitation of Runway 4R-22L at Chicago's O'Hare International Airport
This paper describes the systematic process that was used to develop a rehabilitation strategy for the busiest runway at O'Hare International Airport. Any rehabilitation alternative that...
Finite Element Analysis of Reinforced Concrete in Japan and US: Introduction and Overview
The finite element method of analysis now provides the engineer with the capability to analyze very complex structural systems in a much more realistic manner including geometry and support...
Constitutive models
The constitutive models used in the finite element analysis of reinforced concrete structures are presented from a number of different perspectives. The first part of this chapter presents...
Fracture Mechanics
This brief report, prepared by ACl 447 Subcommittee 2, reviews recent advances in finite element modeling of fracture and damage in concrete structures. The fundamentals of the fracture...
Reinforced Concrete
Recent developments and procedures used to model reinforced concrete using finite element analysis are summarized. Special emphasis is placed on the results of a survey of papers published...
Time-Dependent Behavior
This paper is a report of the material presented at the International Workshop on Finite Element Analysis of Reinforced Concrete, Session 4 - Time Dependent Behavior, held at Columbia...
Computational Aspects
In the past, two distinctly different approaches - smeared and discrete failure models have been adopted to describe failure mechanisms in plain and reinforced concrete structures. Although...
Specific Applications
In recent years, practicing engineers have begun to use nonlinear finite element methods to design and evaluate increasingly complex concrete structures. This chapter presents several...
The Use of Structural Composites in 21st Century Infrastructure Technology
The purpose of this paper is to create and transmit a sense of the unique benefits which effective application of composites technology can bring to the civil engineering. infrastructure...
Composite Materials as Concrete Reinforcement in the Next Decade
Polymer matrix composites (PMCs) are researched for possible implementation in the construction industry. A number of factors affect the widespread use of FRP composites in the civil engineering...
Pultruded Composites: Materials for the 21st Century
The main objective of this paper is to introduce pultruded composites to the civil engineers and to create the awareness of its important applications. A description of the pultrusion...
21st Century Composites Require ASCE Standards and SDS
This paper describes the ASCE initiative and discusses the philosophy and needs for the structural design system (SDS) of which the standards will be a part. Our perspective is from the...
Composite Construction in Steel and Concrete II
Composite steel-concrete structures are widely used throughout the world. Applications range from buildings to bridges to foundations to special structures. In many instances extensive...
Digital Image Processing
Techniques and Applications in Civil Engineering
This proceedings,
Return to search