ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Current and Future Research in Steel Bridge Structures
The topics I have listed are ones which I am aware through discussions with various researches, designers, and industry representatives. The list of topics is presented as a starting point...

Pre-Engineered Short Span Steel Bridges
The American Iron and Steel Institute has developed a package to aid in expediting the design of short-span steel bridges for use by owners, designers, fabricators, and contractors in...

Rigid Beam-To-Column Connection Detail for Circular Composite Columns
Steel pipes with relatively thin wall thickness and filled with high strength concrete have been used in building construction. Some of the advantages of this type of column include eliminating...

Aesthetic Considerations in the Design of a Stack Extension
The Connecticut D.E.P. mandated increase in height of the boiler stack at Backus Hospital in Norwich, CT presented many problems. Adding a new 45 foot vertical section atop the old brick...

Hi-Tech Seismic Rehabilitation of `Casino De Montreal'
The existing eight-story steel structure, built during 1966, lacked in lateral earthquake resistance and ductility requirements of the current building code. Introduction of friction-dampers...

Design and Construction of Post-Tensioned Concrete Floor Systems
This is a summary of the original full length paper which is available from the author. This paper assumes a basic technical knowledge of reinforced concrete design and prestressed concrete...

The Slender Tower of 52-54 East End Avenue
The structural system for the 52-54 East End Avenue project is presented. The 40 story residential tower with as aspect ratio of 12: 1 is one of the most slender buildings constructed...

LRFD vs. ASD for Wood Structures
There is a growing preference within the structural engineering community for the adoption of reliability-based load and resistance factor design (LRFD) procedures in lieu of traditional...

Field Measurements of Tensile Forces on a Spherical Dome Sector Caused by Internal Load of a Granular Product in Storage
Using a number of existing equations developed application to silos, bins, and hoppers, the horizontal load resulting from the stored product can be calculated. In this paper, the physical...

Dynamic Characteristics of Translational Lattice Domes
The feasibility of using lattice domes of various shapes generated by translating a variety of parametric polygons is illustrated and the dynamic characteristics of these lattices determined....

Imperfections and Thin-Walled Bars Behaviour
Experimental and theoretical observations allowed us to present some new conclusions concerning the proper, and safe designing of the structures composed of thin-walled bars (TWB). These...

Possibilities and Problems of Latticed Structures
Several fundamental aspects of space frames which are sometimes referred to as latticed structures are discussed. Terminology of the structural system is first considered. Special features...

Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...

Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...

Helium-Supported Hangar for a Small Solar-Powered Airship
For the IGA Expo '93 the Institute for Statics and Dynamics of Aerospace Structures, University of Stuttgart, together with Stuttgart Solar e.V. developed a solar-powered airship. For...

Wall Relief and Three Dimensional Suspension Sculpture Utilizing Tension and Membrane Structures
The aesthetic concerns and observations on sculptural forms involve tension and membrane structures. In the following discussion, the textile forms, which strongly influenced the more...

The Use of ETFE Foils in Lightweight Roof Constructions
ETFE foils are polymer film sheets which are enclosed in support frames and inflated to provide stable, insulated and transparent roof cushions for lightweight enclosures. This paper describes...

Study on Mechanical Characteristics of Light-weight Complex Structure Composed of a Membrane and a Beam String Structure
This paper aims at studying a new type of Beam String Structure, in which a membrane is used as finishing material. This paper reports on the mechanical characteristics of this structure,...

Seismic Performance and Retrofit of the Golden Gate Bridge
Since its opening in 1937, the Golden Gate Bridge has endured and functions as an important transportation link for Bay Area commerce and commuters. After an earthquake in 1989, T.Y. Lin...

Akashi-Kaikyo Bridge Underconstruction
This paper presents 1) brief history of the survey work, 2) brief description of the physical dimensions and structural system, 3) major studies for the design, 4) development of higher...

 

 

 

 

Return to search