ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Modeling of Maximum Velocity in Open-Channel Flow
A great deal of information about an open channel flow is contained in the maximum velocity, which, along with the entropy parameter, can determine the mean velocity. Therefore, the maximum...

Design Considerations for Use of Wedge Wire Screens at Surface Water Intake Structures
This paper provides the suggested guidelines for design, construction, operation and maintenance of wedge-shaped wire cylindrical screens used for aquatic biota and trash and debris screening...

Analysis of the Torrent Lava Flow Movement and Its Computations - One Example Applied Investigation of Disastrous Torrent Flood
To compute torrent lava flow is hardly an easy task. Most often it has to be determined on the basis of flood traces. In the case of phenomenon discussed, it was the only possible way...

A New Formula for Mean Velocity in Torrents
In this paper we present a new equation for mean velocity in torrents based on travel time measurements and geomorphological relations. Here, the emphasis is not on understanding the physical...

An Alternative Equation for the Mean Velocity in Gravel-Bed Rivers and Mountain Torrents
Including new field data in the slope range of torrents up to 63%, an empirical equation is developed to express the mean flow velocity in terms of the flow rate, the slope and a characteristic...

At-A-Site Mountain River Flow Resistance Variation
At-a-site variation in flow resistance is examined in the light of observations of an S-shaped velocity profile at relative submergences (d/D₈₄)...

An Analysis of Flow Velocity Profiles, Stream Bed Roughness, and Resistance to Flow in Natural Gravel Bed Streams
The characteristics of 82 flow velocity profiles were analyzed from nine different gravel bed stream reaches. A statistical test of the linearity of flow velocity profiles indicates that...

A Mechanism of Pool Formation and Maintenance in Forest Streams
Laboratory and field investigations illustrate a hydraulic mechanism responsible for the formation and maintenance of pools associated with large, in-channel obstructions in forest streams....

Estimating Local Bed Shear Stress in Large Gravel-Bed Rivers
The local bed shear stress ?_o1 cannot be directly measured and is typically estimated using flow observations in various theoretical or empirical...

Turbulent Velocities in a Mountain River
A weighted, electronic Pitot tube was deployed in the swift, boulder-bed Waiho river during a 46 m³/s flow and a 214 m³/s...

Hydraulics and Sediment Transport Processes in a Pool-Riffle Rocky Mountain Stream
Sediment transport processes related to varying channel-bed morphology were investigated from April to November, 1993 along a 1 km pool-riffle and step-pool reach of North Saint Vrain...

On Habitat Simulation in Mountain Rivers
Mountain rivers are quite different from other rivers and one of the characteristics that distinguish them from others is the large variation in velocities with time, with location in...

Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....

Determination of Sediment Profile for a Dry Flood Control Basin
A modification of the standard delta profile method was used to estimate the sediment profile in a dry flood control basin. Dry flood control basins do not have a normal operating pool...

Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...

Reservoir Sediment Removal: Hydrosuction Dredging
Hydrosuction dredging is a relatively little-known method of removing sediment deposits from reservoirs. The method is similar to traditional hydraulic dredging except the difference between...

Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...

Temporal and Spatial Variations of Suspended Sediment Concentration during Navigation Traffic in a Natural River
Suspended sediment samples were collected within the channel border area during barge-tow passage events at three cross-sectional locations on the Upper Mississippi River. Typical plots...

Floating Cover Influence on Sediment Transport in Dune-Bed Channels
The results of laboratory flume experiments with a floating cover and a loose bed indicate that, relative to a free surface flow, the increased drag of a floating cover increases flow...

Carpet Flow Analysis
Under very high flow conditions, sediment may be transported either in a suspension or by carpet flow, as defined by Bagnold. This study examines the theoretical conditions for carpet...

 

 

 

 

Return to search