Using Waste Foundry Sand for Hydraulic Barriers
Green sand is a mixture of uniformly graded fine silica sand, bentonite, and organic binders that is used to make molds for castings in gray-iron foundries. Large quantities of waste green...

Hydraulics of Open Channel Flow
This text is designed to make a deliberate effort to extend the modern fluid mechanics approach into the analysis of open channel flow without necessarily requiring the use of advanced...

Water Resources Engineering '98
This proceedings, Water Resources Engineering 98, contains summaries of papers presented at the 1998 International Water Resources Engineering...

Design and Construction of Earth Retaining Systems
This proceedings, Design and Construction of Earth Retaining Systems, contains papers presented at sessions sponsored by the Geo-Institute...

Channel Stability Assessment for Flood Control Projects
This manual provides assistance for determining potential channel instability and sedimentation effects in flood control projects. It is intended to facilitate consideration of the type...

Hydraulic Fracturing Advances (Available Only in Geoenvironmental Special Issue)
Removing contaminants trapped in clays and nonpermeable soils can be difficult if not impossible with traditional extraction methods. A look at four hydraulic fracturing case studies shows...

Taking in the River
As dams across the country age, so do their intake gates, and testing them requires dewatering. To meet the challenge of dewatering these structures without upsetting sensitive aquatic...

Design of Hydraulic Steel Structures
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 22 This manual prescribes guidance for designing hydraulic...

John F. Kennedy Student Paper Competition and Specialty Seminar Summaries
This proceedings, John F. Kennedy Student Paper Competition and Specialty Seminar Summaries, consists of papers presented at the 27th Congress...

Structural Design of Closure Structures for Local Flood Protection Projects
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 21 This guide provides a framework for the structural...

Waterpower '97
This proceedings consists of papers presented at the Waterpower '97 specialty conference. This international conference on hydropower was held in Atlanta, Georgia, August...

Underwater Magic
Applications of geomembrane systems to arrest concrete deterioration and control leakage in hydraulic structures have been accomplished, with a few exceptions, in a dry environment by...

Energy and Water
Sustainable Development
This proceedings, Energy and Water: Sustainable Development, contains papers presented at the 27th Congress of The International Association...

Environmental and Coastal Hydraulics
Protecting the Aquatic Habitat
This proceedings, Environmental and Coastal Hydraulics: Protecting the Aquatic Environment, contains papers presented at the 27th Congress...

Construction Through Crude Oil
When the Hilltop Interceptor project in Cleveland confronted oil-saturated sandstone, designers had to rethink their shaft construction and support procedures. Among the hazards were volatile...

Financing the Future of Storm Water
For Sarasota County, Fla., draining storm water no longer means draining municipal funds. By establishing a modern storm-water utility, the county has provided a dedicated funding source...

Hydraulics of Subsurface Flow Constructed Wetlands
Resistance to flow through subsurface flow wetlands is described by Darcy's law or by Ergun's equation. Both representations are combined with the continuity...

Application of a Hydrodynamic Model in Design of the Kingman Lake Wetland Restoration Project
The U.S Army Corps of Engineers Baltimore District is restoring 45 acres of wetlands within Kingman Lake in the District of Columbia through the placement of dredged material from the...

Features of a Chevron Weir Rock Ramp
This paper presents the features of a new type of low profile grade control structure, the chevron weir rock ramp. As the name infers, the planform of the structure is in the shape of...

Application of High-Resolution Schemes to Free Surface Flows in Irregular Channels
A 1-D flow model employing a high resolution scheme based on the Total Variation Diminishing concept is applied to non-prismatic channels of irregular cross-section. The hydraulic properties...

 

 

 

 

Return to search