A Shape-Finding Finite Element Analysis for an Equally-Stressed Surface in Membrane Structures
A finite element method is proposed to obtain an equally-stressed surface in a membrane structure, where the displacements and rotations of a membrane are in general finite and nonlinear....
Nonlinear Behavior of Northlight Reinforced Concrete Shells
The behavior of northlight shells is very sensitive to the boundary conditions at the top and bottom edges of the shell. The aim of this paper is to investigate the structural action of...
Modified Asphalt Binders - How Do They Compare?
This report summarizes some of the research that the US Army Engineer Waterways Experiment Station (WES) has conducted on asphalt modification of airport/airfield pavements. these laboratory...
Homogeneity Tests Based Upon Gumbel Distribution
This paper analyzes the performance of three homogeneity tests for Gumbel distributed flood flows. The classic Dalrymple test, a method-of-moment Cv test, and a normalized-quantile test...
Time-related Deflections of Cantilever Bridges
Many prestressed concrete bridges with spans between 100 and 160 m have been built in the Netherlands. The method of construction is the so-called in situ free cantilever construction....
Automatic, Remote, Multiplexed Geotechnical Measurements with Time Domain Reflectometry (TDR)
Time Domain Reflectometry (TDR) has been employed successfully in geotechnical applications such as monitoring of rock mass deformation in a variety of geometries; however, required operation...
A Computer-Integrated Approach to Teaching Engineering Mechanics
A brief survey is first presented of the evolution of computer hardware and the effect of that evolution on structural software applications and development during the past forty years....
Application of OOP and GUI to the Development of Educational Software in Structural Mechanics
A pilot project on the development of educational software in structural mechanics is reported herein. A computer program for the demonstration of shear, moment, and deflection diagrams...
Teaching Soil Mechanics Laboratories with Computer Assistance
This paper discusses the methods involved in teaching the laboratory section of an undergraduate course in soil mechanics using computer assistance. The lab covered one semester with students...
Practical Solution of the Flexibility to Stiffness Transformation Problem With a Mathematical Assistant for the Personal Computer
This paper will show how a relatively complicated structural mechanics problem can be solved easily with a symbolic manipulation program. Specifically, the authors will demonstrate how...
Finite Strain Consolidation for Vertical Drains
Consolidation equations for vertical prefabricated drains which consider finite vertical strain of the soil are derived. Estimated consolidation times are shorter when finite soil strain...
A Procedure for Predicting Seismic Deformation of Earth Structures
This paper presents an analysis procedure for predicting the earthquake induced displacements of earth structures. The procedure is an extension of the simple Newmark method from a single-degree-of-freedom...
Deformations About Excavations in Highly Stressed Rock
The central business district of Sydney, New South Wales (NSW), is dominated by the Hawkesbury Sandstone, a Triassic sedimentary formation. Measurements have confirmed the existence of...
Pressure-Time Flow Rate in Low Head Hydro Plants
Very few methods are accepted for measuring the flow in the large intakes typical of low head, run-of-the-river hydro plants. These intakes are characteristically short, non-uniform, non-prismatic,...
Non-Intrusive Experimental Setup for Inflatable Dam Models
A method which allows for a non-intrusive evaluation of the dynamic response of the inflatable dams under overflow and impounding water conditions is presented. The internal pressure variations...
Influence of a Sand Layer on Headcut Advance
The presence of an erodible material layer in the soil profile has been observed to influence headcut movement in earth emergency spillways. Large-scale flume tests were conducted to examine...
A Lagrangian Model for Surface Buoyant Jets
A model is developed to predict the trajectory of a surface buoyant discharge into a large receiving water body. A Lagrangian approach is used to trace the path of a `control volume' of...
Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...
Fracture Mechanics Applied to Geotechnical Engineering
This proceedings,
Design of Shotcrete Support from the Rock Mechanical Viewpoint
When designing tunnel support the key question is to determine the loading conditions resulting from the deformation of the rock mass during and after excavation. Principle views are given...
Return to search