Rehabilitation of Highway Bridges: Design and Operational Considerations
The design of a rehabilitation of a bridge which must maintain some lanes of traffic requires special consideration of construction procedures and traffic control, which are discussed...
EXPSYS: Offshore Structures' Expert System
This paper builds a framework of an expert system in the area of offshore structures. Expert systems, in general, are classification systems. They embody a core of knowledge about a specific...
The Role of Decision Rules on Structural Safety Evaluation Systems
Three steps are involved during an assessment procedure. The first step is to make a diagnosis for possible causes of the damage, the second is to perform a qualitative evaluation including...
Importance Sampling in Structural System Reliability
In structural system reliability analysis, it is frequently necessary to resort to Monte Carlo simulation (MCS). This paper focuses on Importance Sampling, an advanced MCS method, which...
Experiences with Applications of Importance Sampling in Structural Reliability Computations
This paper presents some experiences and observations relating to the use of importance sampling in structural systems reliability computations. These are presented with three examples,...
Reliability Based Optimal Structural and Mechanical Design
A reliability based optimal design strategy has been developed. Nonlinear limit state functions and nonnormal random variables can be accommodated. For structural systems analysis, a failure...
A Kinematic Approach to Simulation-Based System Reliability Evaluation
System reliability of complex structural engineering systems is often estimated by simulation-based procedures, with failure analysis based on a static (limit state) formulation or a kinematic...
System Reliability Under Time Varying Load
The reliability of ductile and brittle structural systems under time varying loads is investigated. The formulation in the context of outcrossing of a vector process is examined. A new...
Reliability Methods for Steel Members Subjected to Axial Load and Moment
There has been a significant amount of research performed on determining the reliability of elastic-plastic frames where failure is through the formation of a plastic collapse mechanism....
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Effects of Nonlinearities on Structural Reliability and Serviceability
Serviceability and failure limit states are computed using the Simple Plastic Theory (SPT) as well as with a Nonlinear Structural Analysis Program (NSAP). Geometric and material nonlinearities...
Reliability Analysis of Single-Headed Anchor Bolts
Several design equations for predicting the capacity of single-headed anchor bolts embedded in plain concrete have been recommended in the United States. The capacities predicted by these...
On Modelling the Nonlinear Relationship Between Random Fields by Means of Higher-Order Spectra
This paper addresses the input-output relationship of nonlinear systems that may be expressed in terms of a hierarchy of linear, quadratic and higher-order transfer functions or corresponding...
Stochastic Properties of Wind Spectra
In the first part of this paper the correlation function of measured wind spectra is compared with theoretical correlation models assuming a stationary wind process. This comparison indicates...
Dynamic Response of Tall Buildings to Wind Loads
The purpose of this study is to perform a probabilistic analysis of tall buildings subjected to wind excitation. A time domain simulation is first applied to the nonlinear problem. After...
Endochronic Theory and Non-Llinear Stochastic Dynamics of 3-D Frames
Analytical continuous expressions of the material constitutive law are required by equivalent linearization techniques in nonlinear stochastic dynamics. Extensions to study 3D frames,...
Response of Two-Span Beam to Spatially Varying Earthquake Excitation
The effect of the spatial variation of strong ground motion should be considered in the analysis and design of large structures such as bridges, lifelines, dams, etc. The stochastic response...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Probabilistic Structural Response of a Turbopump Blade to Random Pulse Loading
The objective of this work is to develop probabilistic models of the response of a Space Shuttle Main Engine (SSME) turbopump blade to random impact loading. These loads are caused by...
A Probabilistic Comparative Study of Various Base Isolation Systems?Nonstationary Earthquake Excitation
A probabilistic comparative study of various base isolation systems is carried out. The laminated rubber bearing with and without lead plug, the resilient-friction, and the EDF base isolation...
Return to search