Effctive Stress Interpretation of In-situ Tests
Significant differences in terms of load-settlement curves obtained from Plate Load Tests (PLT) and q//c profiles obtained from Static Cone Penetration Tests (SCPT) at two sites with different...
In Situ Tests for Foundation Vibrations
There are several well established methods of determining shear modulus in situ and these are summarized in this paper. New techniques are being developed for in situ determination of...
North American Standard Penetration Test Practice: An Essay
The Standard Penetration Test (SPT) is the in situ mechanical soil test most used by North American geotechnical practitioners. The equipment and procedures of the test have periodically...
Lateral Stress Measurement During Cone Penetration
A lateral stress sensing cone penetrometer (LSSCP) was designed and fabricated. Based on the results of calibration chamber tests in sand, relationships between measured lateral stress,...
Dilatometer to Compute Foundation Settlement
Sixteen examples demonstrate how the S. Marchetti dilatometer test (DMT) provides soil compressibility data for the rapid calculation of foundation settlements with an average ratio of...
Effect of the Fluid Velocity on the Biofilm Development
In order to get basic information concerning the application of a biological treatment to the ammonia nitrogen removal from drinking water, we considered the relation between the biofilm...
Physical Habitat Simulation and the Moveable Bed
One objective of an instream flow analysis is to quantify a flow that will maintain the existing channel and/or flush fine material from the bed. Five empirical approaches to determine...
The Past, Present & Future of Earthmoving Scrapers
This paper is a summary of the history and development and use of earthmoving scrapers. It will also take a look at the future of this type of machine. We'll build the discussion...
Case Studies in Upgrading of Wood Trusses and a Heavy Timber Building
Three case studies in upgrading and rehabilitation of wood structures are presented. One case study relates to three 30m (100ft) span bowstring trusses that had to be cut at various span...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
The History of Construction Management
Construction Management's origins can be traced to several forerunners, and its development, although short, has seen many changes of both practice and attitude. Its cost...
Microcomputers and Design Codes: A Case Study
A microcomputer analysis of the thermal stress problem in reinforced concrete box sections was conducted. An explicit finite difference algorithm for a one-dimensional heat flow analysis...
Computer Errors?Who's Responsible
This paper proposes that both the program developer and the program user share the responsibility for preventing errors in the use of computer programs for engineering design and analysis....
Failures: Who Did It - How Did It Happen?
The forensic engineer investigates the cause of failures and determines, from an engineering viewpoint, who was responsible for that failure. These failures need not be catastrophic but...
Recent Developments in Structural Optimization
This publication contains seven papers that emphasize the recent findings of mathematical formulations, numerical results, and algorithms in structural optimization. Among them, two deal...
Porewater Pressure in Clays Below Caisson Islands
Unfrozen lightly overconsolidated clays are a significant factor in the design and performance of exploration caisson retained islands in the Canadian Beaufort Sea. At two sites (Tarsiut...
Ice Floe Impact Force on Vertical Sided Structures
A solution is described that does not assume a contact pressure-area curve or ice crushing strength. The impact force is related to Korzhavin's ice crushing equation by simple...
Three-Dimensional Analysis of an Artificial Island
A nonlinear, finite element analysis has been carried out to investigate the influence of three-dimensional loading and geometry on deformation and failure of an artificial island. The...
Strength-Deformation Properties of Arctic Silt
Hydrocarbon exploration and production activities in the Beaufort Sea require construction of gravity structures capable of withstanding extremely large ice loads at sites where the subsea...
Undrained Cyclic Behaviour of Beaufort Sea Silt
Cyclic loading behaviour of Beaufort Sea silt has been studied under triaxial conditions, with and without static shear stress, to define the resistance to liquefaction or cyclic straining...
Return to search