Towards Rational Design of Structural Members in Reinforced Concrete
With the increasing emphasis on cookbook designs, plug-in and punch-in formulas, and punch-in numbers in the personal computer program, there is a danger that the designer may accept the...
Advances in High Strength Concrete,
The technology for producing field placeable concrete with a 28 day compressive strength of 10,000 psi has been available for many years. With the recent use of microsilica as an additive...
State of the Art in Concrete-Polymer Materials
Concrete-polymer materials represent a relatively new technology in the construction industry. In some cases polymers are combined with portland cement concrete and, in other cases, polymers...
Impact on Test by Various Multiaxis Excitation
The purpose of this paper is to provide input guidelines in evaluating various types of multiaxis excitation on fragility level testing of electronic devices. There are many variables...
Strength of Soils in Terms of Effective Stress
The factors that determine soil strength, such as amount of confinement, density, particle size distribution, mineral friction, aging, particle crushing, and others, produce their effects...
Probabilistic Basis for Design Criteria in Reinforced Concrete
This collection of papers presents the results of research on the variability of reinforced concrete members carried out at the University of Alberta, Edmonton, Canada, during the period...
Connection Flexibility and Steel Frames
The papers included in this book introduce and present methodologies for the analysis and design of frames which take into account the effect of joint flexibility on the response characteristics...
Concrete Face Rockfill Dams?Design, Construction, and Performance
Concrete face rockfill dams are being used with greater frequency and to greater heights in the last decade. The developments leading to this progress are many and are addressed in the...
Structural Design, Cementitious Products, and Case Histories
The papers in this book represent deverse topics in structural engineering. In design of beam-columns by the AISC interaction equations, it is demonstrated that an inadequacy exists when...
Richart Commemorative Lectures
The geotechnical specialty known as soil dynamics has developed during the past 25 years from a minor role to a mainstream discipline. Professor F. E. Richart has played a major role in...
Geotechnical Innovations: Why Seldom Used in Highways?
Ground improvement methods introduced within the past decade to American geotechnical engineers offer cost savings, ease of construction and reduced construction time. Amont these innovations...
Reinforcing Roof Truss Frames Under Load
Without altering the roof structure of an industrial boiler plant, a long-span steel truss frame was modified in place to support heavier loads. The owners of an industrial boiler plant...
An Extreme-Value Model for Strength of Stiff Clays
The role of the distribution function in the safety analysis of soil structures is briefly discussed. Comparison of the two statistical distributions - normal and Weibull - reveals that...
Probabilistic Characterization of Soil Properties
Bridge Between Theory and Practice
The two objectives established for these proceedings are: (1) to summarize the principles and procedures of probabilistic characterization of soil properties in a readily understood manner...
Low Velocity Impact Tests on Reinforced Concrete Panels
The results of low velocity impact tests on reinforced concrete panels are presented. These tests were conducted to investigate the behavior of reinforced concrete flexural elements subjected...
Strength and Stiffness Characteristics of Steel Ladder-Type Cable Trays
Ladder-type cable trays identical with the as-built are generally tested to establish their strength and stiffness characteristics. Test data for systems in operating plants, however,...
ACI 349 Embedments: Code Provisions and Methods of Analysis
Steel embedments form the critical link between steel and concrete structures. Appendix B of ACT 349, Code Requirements for Nuclear Safety Related Concrete Structures, specifies the ultimate...
Vertical Behavior of Two 16-Year Old Drilled Shafts
Vertical load tests were performed on drilled shafts subject to lateral confining and heaving pressures from expansive soil over 16 years. Results indicated mobilized skin friction equal...
Consolidation-Strength Analysis for Soft Soils
A one-dimensional consolidation analysis including prediction of consequent shear strength increase for soft soils which exhibit large secondary compression is proposed. Consolidation...
Yield Behaviour and Consolidation. II: Strength Gain
In Part I it was shown that in situ yielding of soft foundation clays significantly affected consolidation behaviour and that yield could be defined using the effective stress path/yield...
Return to search