Ultimate Limit State Design for Earthquake Resistant Steel Frames
This paper describes a basic methodology to assess the reliability of steel framed structures subjected to ultimate earthquakes. After a discussion on past damage criteria, a modified...
Damage Assessment of Bridge Structures by System Identification
A method for the damage estimation of bridge structures under seismic ground excitation is developed based on system identification approach. The dynamic behavior of a damaged structure...
Seismic Reliability Analysis for Elevated Pressure Vessels
This paper presents two approaches for assessing the seismic reliability of elevated pressure vessels. A discretized mass mechanical system is used to model the dynamic effects of liquid...
Probability Based Bridge Safety Analysis
Traditional methods of quantifying safety of highway bridges have been associated with deterministic analysis. However, ascertaining the true measure of safety, or reliability, should...
On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...
Approximate Reliability Analysis of Highway Bridges Under the Action of Random Vehicles?In Relation to an Interchange Bridge of China
In relation to an interchange curved bridge of China, a simple method by FSE for analysis of stochastic vibration has been proposed. The random vibration characteristics of bridge structures...
Reliability of a Suspension Bridge Under Traffic Flow
The problem of reliability of a single-span spatial suspension bridge under random highway traffic is considered. The displacements of the bridge are described by coupled, non-linear,...
Vibration Tests and Damage Detection of P/C Bridges
A three-span countryside P/C bridge has been found to have excessive deflections in two of the three spans. It is reported that the prestresses in tendons of two girders of different spans...
Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...
Pressure Vessels for Space Station Freedom
Space Station Freedom (SSF) will utilize more than 10 different types of pressure vessels for storage of oxygen, hydrogen, nitrogen and mixed gases at operating pressures ranging from...
Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...
Museum Showcases the Future
On May 4 in Philadelphia, the Franklin Institute's new wing, called the Futures Center, will open to the public. When the institute's neoclassic main buiding...
Approach to Developing a Ground-Motion Design Basis for Facilities Important to Safety at Yucca Mountain
The DOE has proposed a methodology for developing a ground-motion design basis for prospective facilities at Yucca Mountain that are important to safety. The methdology utilizes a quasi-deterministic...
Outline of Performance Assessment Study on Geological Isolation System in Japan
The goals of current R&D activities are to ensure the feasibility of geological isolation of HLW in Japan and then to establish the social acceptance. In order to attain these...
A Gas-Flow Source Term from a Nuclear Waste Container in an Unsaturated Medium
The potential nuclear waste repository at Yucca Mountain is to be in partially saturated rock. Released radioactive gases would have a direct pathway to the biosphere. The entry of air...
Method for Determining the Fuel Contribution to the Source Term in Trasnport Casks
A comprehensive source term characterization methodology has been developed for the determination of the fuel contribution to the potentially releasable radioactivity in spent fuel shipping...
Post-MECO Propulsion System Requirements for Placement of an STS External Tank in Low Earth Orbit
This paper discusses the findings of a series of computer simulations carried out at the National Institute of Standards and Technology to investigate the requirements for powered flight...
Motion Control of Space Structures
A new area of civil engineering is emerging as we begin to establish a permanent presence in space. The new area of civil engineering is the motion control of space structures. This paper...
Effects of Initial Conditions on Large Space Structures
Effects of initial conditions of axial deformation (length) and attitude (pitch) angle have been investigated on the subsequent orbital motion, attitude (librational) motion, and axial...
Actively Controlled Optimum Structural Design
This paper deals with the investigation of the number and location of actuators and sensors on the optimum structure and control design of space structures. The optimization problem is...
Return to search