A Hydraulic Study of Venous Valve Closure
The functions of the veins is to convey blood from the periphery to the heart. The distribution and transportation of blood between different parts of the body is regulated by a host of...
Interaction Effects in the Hybrid Control of Euler-Bernoulli Beams
The effect of viscous and Voigt damping upon the open loop response of simple continua such as Euler-Bernoulli beams is well understood. However, when attempting to control a distributed...
Recent Findings in Active Structural Control
Over the past decade, tremendous advancements have been made in the development of structural control paradigms and in the necessary supporting technologies. The fundamental paradigm that...
Lumped Parameter Model for the Dynamics of the Pulmonary Circulation
The pulmonary circulation is a low pressure system such that respiration has an important effect on pulmonary hemodynamics and has to be taken into account when predicting its behavior....
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
Vacuum Melting and Mechanical Testing of Simulated Lunar Glasses
Lunar silicate glasses may possess superior mechanical properties compared to terrestrial glasses because the anhydrous lunar environment should prevent hydrolytic weakening of the strong...
Coastal Engineering Practice
This proceedings contains 70 papers presented at the American Society of Civil Engineers Specialty Conference Coastal Engineering Practice '92 held at Long Beach, California,...
Evaluating Spillway Adequacy
More than a third of all dam failures are caused by overtopping. Equipment malfunctions or operations errors are sometimes to blame, but the principal cause is inadequate spillway capacity....
Urban Development on Alluvial Fans
An increasing number of developments has been planned in areas subject to flood hazards. To protect developments from flood damage and to prevent accumulated negative effects on floodplains,...
Risk Analysis in Water Resources Engineering: Development and Application
Traditional engineering approaches for evaluating safety and performance in technical projects are usually based on conceptual modeling and the application of engineering standards. Risk...
Reliability of Controlled Structures Subject to Real Parameter Uncertainties
This paper presents a systematic and probabilistically consistent approach for determining the likelihood that instability will result from the uncertainty inherently present in a controlled...
Effect of Active Control to Structural Reliability
Most available results in the study of structural reliability deal with idealized mathematical representation of structures. With model supported diagnosis of the structural condition...
Optimizing Economic Returns in Drainage Design
Soil wetness is a limitation to high agricultural productivity in Northern New York (NNY) where some 325,000 ha of cropland require drainage treatment. Drainage is needed for trafficability...
Stochastic Analysis of Seasonal Hydraulic Conductivity
Infiltration data collected by a ring infiltrometer tests, for summer, fall, and spring seasons, were used to determine hydraulic conductivity using Philip's two-term infiltration equation....
Stabilizing Drop Structure by Drainage Modifications
East Drain Terminal Drop Structure is located in East Drain, an open toe drain of Palmetto Bend Dam, in the tide water area of south Texas. The drop structure was threatened by piping...
Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....
Technology Transfer for Projects in South America
Engineering services were provided for three projects in South America. One project was located in the Pampa Region of Argentina and two others in northern Brazil. The projects were: 1)...
Design and Maintenance Factors Affecting Application Uniformity of Low Pressure Center-Pivot Irrigation Systems
Uniformity tests were conducted on 30 center-pivot sprinkler systems installed with one of six different low pressure nozzle types or high pressure impact sprinklers. Well designed and...
Progress Report ARS/SCS Runoff Curve Number Work Group
The Soil Conservation Service (SCS) Runoff Curve Number (RCN) procedure works well as a single event model to estimate design storm runoff volumes from a small agricultural watershed....
Simulation of Runoff and Infiltration of Disturbed Land
Disturbances of land due to human and natural causes change the porosity and hydraulic conductivity of the soil. A simulation model of conjunctive surface-subsurface flows can be used...
Return to search