Selecting an Economical Water Main Rehab
Many miles of aging water mains exist with carrying capacities that are less than half of what they were when new. Engineers must, therefore, stretch every dollar to eliminate deposits...
Hydraulic Testing of a Large Make-Up Pipeline
A 37 mile pipeline which consists of sections of 114 inch, 96 inch and 66 inch pipes was constructed for delivering secondary sewage effluents for power plant makeup. During initial operations,...
Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...
Hydraulic Analysis of Water Transmission Flowing Party Full
The hydraulic behavior of a transmission line that flows full along only part of its length is more difficult to analyze than a completely full line. Unsteady open-channel and closed-conduit...
Computer Aided Hydraulic Design of Pipelines
General purpose computer software packages are being used more frequently in the hydraulic design of pipeline systems. The areas where the use of such packages are advantageous over earlier...
Vacuum Assisted Pipelines Operation
In the process of upgrading the sewerage facilities for Lancaster, Pennsylvania, it was decided to combine two existing facilities into one new facility. This required the design of three...
Milwaukee Sewerage District Interplant Pipeline
The pipeline is intended to transfer solids between the Jones Island and South Shore treatment works a distance of approximately 12 miles (19. 3 km). The 4 conduit pipeline comprising...
Pipe Spillway Plunge Pool Design Equations
An equation is given to determine if scour holes will beach and widen excessively. For nonbeaching scour holes, dimensionless equations are given for the progression of scour with time...
Cavitation in Various Types of Shear Flow
Cavitation in turbulent shear flow depends on the intensity and spectral characteristics of the pressure fluctuations in a Lagrangian frame of reference as well as depending on the concentration...
A Quantitative Assessment of Surface Water Resources for Coal Slurry Pipelines Originating in Southwest Virginia
In view of the high streamflow variability, preliminary quantitative assessment was made of the capacity requirements and low-flow frequency characteristics of offstream reservoirs needed...
Hydropower Plant on an Irrigation Pipeline
A 940-kW hydroelectric plant was installed on a renovated irrigation pipeline at a Bishop, California ranch. On its way to the ranch, the falling water now generates an average of 4. 2...
Power from a Water Supply System: A Resource Which Can Be Tapped
There are numerous water supply systems from which hydroelectric power could be developed without impending the regular operational schedule. The basic principle of operation is not different...
Will Southern California Revert to a Desert?
The nearly 13 million people in Southern California - one-half of California's population - face the prospect of water shortages in the near future. These people depend on...
Design and Operation of Pipeline Control Systems
More and more of the time of the engineer involved in the design and construction of a pipeline project is devoted to problems relating to the control systems to operate and monitor the...
Structural Engineering in Nuclear Facilities
The papers in this publication cover the general theme of civil and structural engineering as they are applied to nuclear facilities. Traditional topics include seismic analysis, impactive...
Guidelines for the Seismic Design of Oil and Gas Pipeline Systems
Current knowledge on the practice of earthquake engineering for oil and gas pipeline systems is presented. Such systems typically consist of buried oil, gas, or product pipelines and aboveground...
Design for Ice Forces
Part one of this publication on design for ice forces emphasizes offshore and coastal structures. In this section , seasonal ice conditions typical of offshore and coastal zones are reviewed....
Design of Offshore Pipelines for Ice Environments
Design and installation of offshore pipelines in cold regions requires special care. Low ambient temperatures may cause increased friction losses in oil and gas lines due to wax crystallization...
Design of Submerged and Floating Structures
The objective of this paper is to present an overview of the state-of-the-art of ice engineering as applied to submerged and floating structures. Five specific design studies are reviewed,...
Thaw Settlement Analysis for Buried Pipelines in Permafrost
This paper focuses on determination of allowable thaw settlement for the design of cross country pipelines in permafrost areas. The purpose of the thaw settlement evaluation is to aid...
Return to search