Momentum and Kinetic Energy Coefficient Research?Ramp Flumes
In October 1984. Reclamation Hydraulic Branch staff members investigated the operation of the A-Canal ramp at Klamath Falls, Oregon. The ramp flume was completed in 1983 as a water measurement...
Critical Flow Through Bridge Piers
A physical model study was performed at California State University, Long Beach to investigate the location of critical depth within bridge piers in supercritical lined channels. This...
Three-Dimensional Modelling of Recirculation Behind a Groyne
Extensive investigation on the three-dimensional flow patterns behind a groyne have been carried out in a small-scale experiment. A three-dimensional hydrodynamic numerical model is verified...
Instability of Water-Fluid Mud Interface
Erosion and entrainment of fluid mud are treated by means of shear flow analysis. The water-fluid mud system is considered as a layered system of two continua separated by a distinct interface...
Slurry Removal From a 2-D Fluidized Region
A two-dimensional fluidization experiment is performed on fine sand with a 5.08 cm diameter source pipe with horizontally opposed orifices, 0.317 cm in diameter, spaced 5.08 cm. Slurry...
A Study on Estimation of Aquifer Parameters in Unsteady Seepage Flow
A method which automatically identifies aquifer parameters is proposed in this paper. The aim of this investigations is to estimate transmissivities and storage coefficients of unsteady...
3-D Cavity Flow Analysis by a New Fractional Step Method Based on the Finite Element Method
This paper describes a new finite element scheme for solving the time-dependent incompressible viscous fluid flow expressed in terms of the Navier-Stokes equations. The main feature of...
Limitation to Standard Parshall Flume Calibrations
Parshall flumes are widely used for metering open channel flows. An inspection of the original study which developed the rating equations indicates that the flumes were not tested for...
Selection of Hole Size for Fluidization Pipes
Two-dimensional fluidization experiments are performed on fine and medium coarse quartz sands at depths of 25.4 and 42 cm. Four supply pipes are used with orifice diameters of 1.587 mm...
A Semi-Empirical Model for an OC-OTEC Spout Flash Evaporator
A phenomenological model for the thermal-hydraulics of a spout flash evaporator is presented in this paper. The model considers the two-phase flow behavior both in the spout and in the...
Resin Transfer Process Modelling: Computational & Experimental
In most cases, the resin transfer molding (RTM) researcher has a fundamental understanding of composites and possibly some mold design experience. The areas of resin flow dynamics and...
Stratified Flows
This volume contains the edited and refereed proceedings of the Third International Symposium on Stratified Flows, convened on February 3-5, 1987 in Pasadena, California. It consists of...
Progress in Hydromechanics
The historical development of hydromechanics in the fifty years since the founding of the Hydraulics Division is reviewed. Rouse's 1938 text, Fluid Mechanics for Hydraulic Engineers, provided...
Surface Water Hydrology
A brief history is presented of activities in surface water hydrology by the Hydraulics Division since 1938. Included is an historical review of division activities in such areas as precipitation...
Research in ASCE's Hydraulics Division
Research in the Hydraulics Division of ASCE during the last 50 years has undergone changes in both technical content and procedures. Open channel flow, sediment transport and pipe flow...
NDE for Performance of Wood Structures
Significant economic losses result annually due to deterioration and failure of structural wood components. A high percentage of these losses result from our current inability to assess...
Unsteady Aeroelastic Base Moments on a High-Rise Building
To consider aeroelastic instabilities of prismatic structures in winds, i.e., vortex induced vibrations or galloping oscillations, unsteady aeroelastic forces must be investigated as the...
Vibration Control Damper Using Sloshing of Water
The objective of this study is to develop a method of reducing wind-induced vibration of long-period structures utilizing sloshing of water in tanks added to the upper part of the structures....
Hydrodynamic Interaction Effects in Earthquake Response of Arch Dams
With the aid of earthquake response results it is demonstrated that the following hydrodynamic effects should be considered in the analysis of the earthquake response of concrete arch...
Hydrodynamic Isolation of Concrete Dams
The feasibility of reducing hydrodynamic effects in the earthquake response of concrete dams by anchoring gas-filled balloons or injecting bubbles in the water is investigated. Significant...
Return to search