Frequency Response Design of Controlled Structures
The installation of optimal control systems has been shown to be effective in reducing the vibration responses of structures. In addition to the effectiveness, there are many factors that...
Optimization of Structures Subjected to Vibrations
A minimum cost optimization procedure is presented for the analysis of multi-degree freedom structures subjected to steady, transient and random vibration environment. The procedure is...
Concrete Strength-Quality Assurance
The usual criterion for establishing grades of structural concrete is the compressive strength measured in an arbitrary manner on a standardized specimen stored in a stipulated fashion...
Vibration Control Damper Using Sloshing of Water
The objective of this study is to develop a method of reducing wind-induced vibration of long-period structures utilizing sloshing of water in tanks added to the upper part of the structures....
Experimental Study on Structural Control for Seismic Loads Using Passive and Active Devices
The feasibility of controlling the responses of structures against seismic loads is investigated through some experiments and numerical analyses for both the passive and active control...
Tradeoffs Between Active Control and Identification of Structural Systems
This paper explores the tradeoffs between structural identification and structural control in a quantitative manner. Through the intemediary concept of an optimal input, it is shown that...
Jet Grouting for Underpinning and Excavation Support
Jet Grouting as a new tool for underpinning and excavation support is presented, describing the systems of Jet Grouting and its advantages over conventional underpinning techniques. A...
Case Histories of Shallow Foundations on Improved Soil
Case histories for four projects, with structures varying from a 27-story high rise to a one-story shopping center, are presented. For each of these projects, improving the soil to allow...
Cost Effective Pile Foundation Supports Fast Track Paper Mill
This paper decribes the generalized subsurface conditions, pile evaluation and load test program, pile and piling contractor selection, production pile installation, and quality assurance...
Computer Utilization in Structural Engineering
This volume contains the papers presented at the 1989 Structures Congress sponsored by the Structural Division of the American Society of Civil Engineers that deal directly with the application...
Real-Time and Off-Line Aids for Teaching Digital Control
This is a report of unique computer tools developed for teaching of the design of digital control systems at the University of Wyoming. The real-time components of the laboratory involve...
Safety in the Industrial Robot Environment
Safety requirements differ for applications with or without a human interface. The extent of human interface with the robot must be determined. Design of the robot, guarding, access, and...
ROBOSIM: A Simulation Package for Robots
ROBOSIM was developed first in a VAX environment. Using PC's with a terminal program capable of emulating a TEKTRONIX 4014, students can create robots, see them graphically,...
POU/POE Water Treatment: Regulatory Challenge
During the past few years the use of point-of-use (POU) and point-of-entry POE) water treatment devices has grown dramatically. One attendant consequence has been the proliferation of...
Point-of-Entry/Point-of-Use Water Treatment-? Where Do We Go From Here?
The development and marketing of point-of-entry-entry/point-of-use (POE/POU) devices has become a multi-million dollar business, and is projected to become even larger with the annual...
Contact Stabilization Process Analysis and Formulation
In this paper, the contact stabilization process is analyzed. In comparison to the conventional activated sludge process, there are a larger number of independent design variables involved...
Importance of Aeration Basin Detention Time in the Activated Sludge Process
Aeration basin detention time is a key design parameter for an activated sludge system at a wastewater treatment plant. The impacts of reducing the aeration time is illustrated by a case...
Control of
The paper reports on a study to determine the cause(s) of the biological imbalance and identify corrective measures. Project activities included: isolation and identification of filamentous...
Optimizing the Activated Sludge Process by Encouraging Futile Cycling
A study was conducted to demonstrate that cell yield in activated sludge processes can be decreased without increasing oxygen consumption by applying operating conditions that encourage...
Gamma Exposure from Rn Progeny in GAC Units
An investigation into the gamma exposure rate generated by granular activated carbon (GAC) water treatment units focused on ten sites that covered a range of source radon (Rn) in water...
Return to search