Developing a New Construction Policy for Bridge Management
The SHRP Program and other rehabilitation strategies are based on extending the life of concrete bridge elements. In the Bridge Inventory are a number of bridges that must be reconstructed....
Testing of Concrete Permeability for Durability Evaluation
Field and laboratory permeability tests are being performed to evaluate the durability of concrete in Florida. These tests are part of an extensive research program to develop a durability...
Durability of Concrete Bridges in Virginia
This paper discusses four major types of deterioration found in concrete bridges: corrosion of the reinforcement, alkali-aggregate reactivity, freeze-thaw deterioration, and attack by...
Bonded Polyester Concrete Overlays Used in California
Bonded polyester concrete overlays have been very successful in California in restoring and preserving bridge decks from damage by road salts. The polyester concrete system has been employed...
NDE of Steel Bridges by Acoustic Emission
Acoustic emission technique (AE) was used to investigate fatigue cracking phenomenon during a series of laboratory tests of various bridge steels and during field testing of an in-service...
Nondestructive Inspection of Steel Bridge Members
Assessment of the conditions of an aging population of bridges in order to determine the proper maintenance or retrofit operation is a challenge of great importance to bridge engineers...
Nondestructive Evaluation of Timber
Nondestructive evaluation of materials, the science of identifying the physical and mechanical properties of materials without altering their end-use capabilities, is valuable in defining...
Conceptual Design of a Monitoring System for Maglev Guideways
The state-of-the-art in nondestructive testing (NDT) technology has advanced significantly over the past fifteen years and has reached a stage where continuous monitoring of structures...
Proof Loads in LRFD Format for Bridge Evaluation
Proof load testing is considered as a reliable approach to evaluation of an existing structure's load-carrying capacity. It can be effectively used for highway bridge evaluation, to either...
Development of Bridge Load Model for LRFD Code
The load models are based on the available statistical data on dead load, truck loads and dynamic loads. The paper deals mostly with the static live load. The model is derived from truck...
Bridge Engineering and Life Cycle Cost
The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) requires that all Federal Aid projects must 'consider...the use of life-cycle costs in the design and engineering of...
Reliability-Based Expert Systems for Optimal Maintenance of Concrete Bridges
In this paper ongoing research in the CEC supported BRITE/EURAM project P3091 is presented. In the project reliability based expert systems for inspection and maintenance of corroded reinforced...
Reliability of Highway Bridge Piers
Structural safety of reinforced concrete bridge piers supporting highway traffic is studied. Reliability indices for flexure, shear, and combined flexure and axial load limit states at...
Experimental Testing of Laterally Loaded Large Scale Bridge Abutments
The challenges to a bridge analyst in defining abutment boundary conditions and the current state of the practice are presented. Variables within the abutment system are defined and discussed...
An Information System on the Performance of Suspension Bridges Under Wind Loads
While most suspension bridges for which information is available, in operation between the period: 1701-1992, have performed satisfactorily under wind loads, a few bridges were destroyed,...
After-Fracture Response of a Two-Girder Steel Bridge
The I-40 bridges over the Rio Grande are due to be razed in mid 1993 due to geometry and traffic safety considerations. The bridges are classified as 'fracture critical' two girder steel...
Modal Analysis Technique for Bridge Damage Detection
The dynamic responses of a wide-flange steel beam with artificially introduced cracks were studied analytically and experimentally. Frequencies, displacement mode shapes (DMS) and strain...
Full-Scale Bridge Test to Monitor Vibrational Signatures
A full-scale highway bridge, in the process of being demolished and replaced was monitored using vibrational techniques in its in-service condition. The bottom flange and web of one fascia...
Correction Factor Method for Building Analysis Under Sequential Dead Loads
The effect of the sequential application of dead load due to the sequential nature of construction is an important factor to be considered in the multistory frame analysis. One of the...
Wind-Induced Vibrations of Tall Buildings Using Tuned Mass Damper
A Lagrange formulation is applied to tall buildings using tuned mass damper. The resulting equations of motion are analyzed using a frequency window method. The method reduces the computational...
Return to search