Cost Effective Risk Allocation for Coastal Engineering Projects
Project participants will benefit significantly by routinely taking a more systematic, structured, and global view of risk than is sometimes done at present. Enhanced and broadened cognizance...
Coastal Engineering Design Codes in the Netherlands
Dutch research strategy on water defences and the resulting coastal and hydraulic engineering design codes (technical documents) are briefly overviewed. Special attention is paid to organizational...
Our Aging Coastal Infrastructure
The River and Harbor Act of 26 May 1824, signed by President James Monroe, authorized the first involvement of the United States Federal government in the construction of harbor works...
Tackling Trapped Sediments
Crater-sink fluidization has been used to recover sediment from harbors for the past couple of decades. Can this method bypass sediment around dams and return it to eroded beaches, solving...
Piles Over Problems Sites
It's increasingly difficult to find suitable space for construction in urban areas. Pile foundations can fill the void by making questionable and heavily regulated sites,...
Flexible Porous Breakwater
This is a theoretical study of the reflection and transmission of linear waves by a flexible, porous and thin beam-like breakwater held fixed in the sea bed. The breakwater is idealized...
Screen Breakwaters
The diffraction of water waves by an offshore breakwater consisting of an infinite row of equally-spaced vertical screens is investigated theoretically. The reflected and transmitted wave...
Wave Induced Vortex Near Seashore
The vortex motion behind submerged breakwaters in the nearshore region is studied. The RCPWAVE model (Ebersole et al., 1986) is used to calculate the wave field and thus the radiator stresses...
In Situ Recovery of Water from Dormant Comet Cores & CI Carbonaceous Chondrites
Water and volatiles may be produced by drill holes into dormant comet cores or class CI or CM asteroids. This is modeled after in-situ mining as in the Frasch process sulfur mines of the...
Modeling Nearshore Currents in the Vicinity of the Endicott Causeway, Alaska
The Endicott Causeway connects two oil production islands on the southern side of Stefansson Sound, about 5 km offshore of the Sagavanirktok River delta, to the mainland of the Alaskan...
Impact of Breakwater Removal on Hydrodynamics and Water Quality in Flushing Bay, New York
Hydrodynamic and water quality models were used to simulate the potential effect of removing a breakwater to increase flushing and improve water quality in Flushing Bay, New York City....
Incorporating Corrosion in Reliability-Based Design of Anchored Bulkheads
Corrosion of steel is an important factor in the design of marine structures. A reliability analysis of anchored bulkheads showed that corrosion changes the critical failure mode from...
Aldicarb Transport in the Coastal Plain of N. C.
The pesticide aldicarb is extremely soluble in water which causes it to be mobile in ground water. A field study was conducted to monitor the fate of the pesticide aldicarb in a poorly...
Water Quantity and Quality for Irrigated Agriculture and Wetlands
A water balance for the Carson Division of the Newlands Project in Northwest Nevada was created to identify the potential recovery of irrigation drainage effluent from the shallow aquifer...
Evolving Mitigation Requirements for Port Development
Mitigation for wetland impacts associated with port development at the Port of Tampa has evolved significantly over the past two decades. A recent major wetland creation program at the...
Deep Water Container Wharf & Crane Foundation
A deep water anchored steel bulkhead and a parallel-independent low-profile, pile supported crane rail foundation with special stowage areas are discussed from soils investigation, through...
Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...
Design and Construction of Waterfront Facilities at U.S. Navy Homeport at Ingleside, Texas
The waterfront facilities for the largest of the Navy's new homeports in the Gulf of Mexico were completed in 1990. The project included over 2,500 feet (762 m.) of deep draft bulkhead...
Replacement of a Deteriorated Steel Sheet Pile Bulkhead
This paper presents a life history of a marine steel sheet pile bulkhead, over 35 years old, that has been exposed to a salt water environment with minimal maintenance or repair in the...
Historic Seawalls of the Boston Harbor, Massachusetts Region: Evolution, Construction and Repair
The earliest seawalls in the Boston region were of crib construction. Cobb cribs had an open framework and could readily be floated into position and sunk with rock from local sources....
Return to search