A Dome For the 21st Century
Putting a circular dome on a square building--the classical architectural design challenge--takes on new proportions at the Federal Building and Courthouse in Charleston, W. Va. The 170...
Debating Steel - Connection Design
The debate about responsibility for structural-steel-connection design is among the hottest engineering disputes of our generation. Meetings have been held on the subject, articles written...
Preserve and Protect
Historic and landmark structures constructed of unreinforced masonry and stone are among the most vulnerable to strong ground shaking and are often subject to possible collapse. For the...
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
The Inelastic Response of an Offshore Platform in Hurricane Andrew
Amoco's Gulf of Mexico South Timbalier 161A platform took a direct hit from Hurricane Andrew in August of 1992, experiencing loads which far exceeded its design load. The platform had...
Nonlinear Collapse of Offshore Jacket Structures
The Joint Industry Tubular Frames Project was established with ten oil industry sponsors to investigate the reserve and residual strength of frames typical of offshore structures. To date...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
High-Strength Concrete Columns in High-Rise Buildings
Strength and ductility of high-strength concrete columns were investigated by examining available test data. The results are summarized in terms of load and ductility capacities of columns....
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
Behavior of Foundations Subjected to Large Ground Movements
The behavior of twelve linear test foundations above an advancing longwall coal mine panel was observed. Three phases of deformation were observed in the centerline foundations: tension,...
Dynamics of Nuclear Power Plant Structures with Foundation Interaction
This paper presents analyses and conclusions pertaining to a recorded earthquake motion felt at a nuclear power plant. The objective is to obtain frequency composition, assess damage potential,...
Coupling Translation and Rocking Motions
In the design of concrete block foundations for rotating and reciprocating machines, it is important to avoid resonant conditions. Therefore, accurate determination of the frequencies...
Physical Model Tests of Dolos Impact Stresses
An on-going experimental study to determine impact stresses and static nesting stresses in instrumented large scale model dolosse is described in this paper. Seven dolosse were instrumented...
Load Duration Effects in an 85-Year-Old Timber Structure
Duration of load (DOL) effects are assessed in 85-year-old heavy timber trusses using five common DOL models. These models are based on the idea of static damage accumulation. Material...
Seismic Analysis of Bridges: Simplified or Refined Approach
This paper discusses the differences of seismic responses of bridges among various analysis methods and approaches....
U.S. / Japan Large Scale Cooperative Research Program for Steel Structures
The US/Japan Cooperative Research Program Utilizing Large Scale Test Facilities for Earthquake Resistant Design was initiated in 1980 using a combination of full-scale, small-scale, subassemblage...
Corrosion Resistant Epoxy-Coated Reinforcing Steel
Research conducted in the 1970s to evaluate and develop criteria for nonmetallic coatings to protect steel reinforcing bars embedded in concrete bridge decks from the corrosive action...
Representation and Processing of Design Standards: a Bifurcation between Research and Practice
There have been attempts to develop representations of design standards and procedures for computing representations of the design standard on which computations are based. However, within...
Impediments to the Implementation of Seismic Isolation
There are over 400 civil engineering structures, worldwide, that have been constructed using the principles of seismic isolation, and 70 of these are in the United States. Although use...
First Bank Place: A Composite Cruciform Spine
The First Bank Place, designed by the internationally known architectural firm of Pei Cobb Freed and Partners, is a granite-clad, 56 stories tall building in downtown Minneapolis. Presented...
Return to search