Soil-Cover Success
After seven years of operation and extensive vertical and lateral expansions, owners of the Kingsland Park Sanitary Landfill, located in northern New Jersey's Meadowlands,...

Computer-Aided Cleanup
In late 1992, the remedial investigation of Operable Unit 2 at the Department of Energy's Fernald Superfund site in Ohio was in trouble. Despite years of effort-including...

Fracture Mechanics Applied to Geotechnical Engineering
This proceedings, Fracture Mechanics Applied to Geotechnical Engineering, contains theoretical and experimental studies related to the formation,...

Ground Failures Under Seismic Conditions
This proceedings, Ground Failures Under Seismic Conditions, contains invited and contributed papers which focus on the behavior of silty and...

In-Situ Deep Soil Improvement
This proceedings, In-Situ Deep Soil Improvement, contains papers presented at sessions sponsored by the Geotechnical Engineering Division of...

Under Cover
The impermeable properties of flexible membrane liners have made them hot properties for landfill closure-cover systems. But slip-resistant clay might still be the best cover material...

Jet Grouting Gains
Jet grouting, a soil stabilization technology developed in Europe, was introduced in the U.S. in the early 1980s. Due, in part, to the use of inappropriate equipment, jet grouting got...

Short Aggregate Piers Defeat Poor Soils
A short aggregate pier system, developed to provide an economical alternative to the overexcavation/replacement technique, has been used used since 1988 to control settlement of structures...

DSM Saves the Dam
The Miami Conservancy District built five flood control dams after the catastrophic flood of 1913 in Dayton, Ohio. Lockington Dam was one of these five hydraulic fill structures. The Ohio...

Settlement Analysis
The U.S. Army Corps of Engineers Manual, Settlement Analysis, presents guidelines for calculation of vertical displacements and settlement of soil under shallow foundations. As soil is...

Stress Wave Loading of a Tunnel: A Benchmark Study
Five different finite element or discrete element computer codes were used to solve a sequence of problems leading to the problem of stress-wave loading of a circular tunnel in a jointed...

Scoping the Monitoring Instrumentation to Meet Repository Design and Construction Needs
This paper discusses categories of instruments that are available and recommended for consideration to monitor the engineering performance and interactions of the geologic media, groundwater,...

Banking on a Bridge
Completing the geotechnical design for the approach embankments and foundations for the Charter Oak Bridge, which crosses the Connecticut River between Hartford and East Hartford, Conn.,...

Input for Seismic Design of Major Structures
Effective seismic input considering the soil-structure interaction or soil-pile-structure interaction is presented. This approach takes the seismic wave as primitive input and considers...

New Methods to Characterize Site Amplification
Methods alternative to spectral ratios are introduced to characterize site amplification. The methods are developed by using a range of models, from the simple constant amplification model...

Dynamic Field Response Studies and Earthauqke Instrumentation of the Meloland Road Overcrossing
Ambient vibration data was obtained at the Meloland Road Overcrossing near El Centro in California by The California Department of Transportation (CALTRANS) as part of a 1978 Federal Highway...

Dynamic Soil-Foundation Interaction at the Meloland Road Overcrossing
Forced vibration tests, using a hydraulic ram device, were conducted on the Meloland Road Overcrossing (MRO) bridge over Interstate 8 near El Centro, California. Dynamic response data...

Seismic Analysis of Meloland Road Overcrossing Using Calibrated Structural and Foundation Models
A detailed seismic analysis of the Meloland Road Overcrossing is being implemented to study the response of this bridge during the 1979 Imperial Valley Earthquake. This analysis is based...

Tension Pile Test
The California Department of Transportation is conducting FULL SCALE AXIAL LOAD TESTS of 34 piles. This research project/proof test is being jointly conducted by public agencies (Caltrans...

Design Wind Speed and Design Criteria of Buildings
Design load recommendations of Architectural Institute of Japan(A.I.J.) are revised according to a common principle to all kinds of loads. The basic wind speed is defined as the annual...

 

 

 

 

Return to search