Peaks Over Threshold Model for Seasonal Flood Variations
The peaks over threshold (POT) series model has been used in hydrology to analyse extreme phenomena such as floods or precipitation amounts exceeding a certain threshold level. The results...
Robust Estimators in Hydrologic Frequency Analysis
This paper applies a specific robust estimation procedure known as 'trimming' in flood frequency analysis. The trimming technique consists in censoring the series of recorded floods by...
The Method of Derived Distributions Applied to Peak Flows
Random variables which are functionally related have their probability distributions also related in a prescribed manner. Thus, in theory, the probability distribution of peak discharge...
A Revised Snowstorm Maximization Method for Canadian Boreal Regions
A proposed refinement in the development of design snowpacks for use in the derivation of probable maximum floods (PMF) estimates in the Canadian Boreal is presented. Shortcomings in the...
Kinematic Mixing in Stratified Aquifers
The mixing process in heterogeneous aquifers is presented as the bending and stretching of material lines. A linear mixing efficiency is defined in terms of the mean values of a unit length...
Unit Hydrograph Estimation Procedures Using Orthogonal Functions
All unit hydrograph estimation procedures based on orthogonal functions are reviewed in this paper. A more physically based orthogonal function (a gamma function) for unit hydrograph estimation...
An Integrated Software System for 3DFEMWATER: A 3D Grid Generator, A Graphical Post-Processor, and Additional Analysis Tools
An integrated software system for 3DFEMWATER has been developed to improve the groundwater flow modeling process. The system generates finite-element grids, graphically portrays simulation...
Modeling Two-Dimensional Subsurface Flow, Fate and Transport of Microbes and Chemicals
A two-dimensional model to simulate the subsurface flow, microbial growth-degradation, and transport and biodegradation of chemicals in groundwater environments (2DFATMIC) is developed....
A Two-Dimensional Flow and Hydrogeochemical Transport Model
A two-dimensional flow and hydrogeochemical transport model is designed for estimating the movement and attenuation of chemicals after they are released into subsurface systems. This model...
Adapting BMPs to California Hydrology and Climatology
The State of California has the most diverse hydrology and climatology in the United States. It boasts the highest and lowest elevations in the continental U.S. and annual rainfall varies...
Impact of Digital Elevation Model Grid Size on Extracted Drainage Parameters
The dependence of extracted drainage network properties on the spatial resolution of DEMs is investigated for a study basin. A series of raster DEMs of increasing cell size is generated...
3D-Simulation of the Twin Lake Tracer Test
The 1983 Twin Lake tracer test was simulated using a three-dimensional finite element model. The model was calibrated comparing calculated and measured piezometric heads as well as vertical...
A Log-Triangular Design Hyetograph for Stormwater Management
A method is developed to generate a log-triangular design hyetograph from historical rainfall data. The method considers the characteristics from other commonly used methods for design...
Augmented TINFLOW: A Deterministic Runoff Model with a Stochastic Rainfall Input
Augmented TINFLOW consists of a deterministic runoff model based on a Triangulated Irregular Network (TIN) description of a watershed. The rainfall input is created by simulating convective...
Streamflow Forecasting for the Bradley Lake Project
The National Weather Service (NWS) uses a suite of software called NWS River Forecast System (NWSRFS) for operational river stage and streamflow forecasting. NWSRFS is a modular system...
Adjustment of Groundwater Quality Models
Groundwater quality models have been used lately in solving cases dealing with groundwater flow and pollutant transport problems. Finite element method is used in such problems and is...
Anisotropic Effects on Flow from a Recirculation Well
We examined flow in an unconfined aquifer near a recirculation well, which consists of a source and a sink of equal strength, with emphasis on understanding the effects of anisotropy....
Next Generation HEC Catchment Modeling
The Hydrologic Engineering Center (HEC) is developing next generation computer models to replace those in current use. The next generation Hydrologic Modeling System (HEC-HMS) is an object...
Practical Experience in the Probabilistic Based Management of Large Water Resources Systems
Probabilistic tools to assist with the management of large water resource systems in South Africa were developed and applied during the last decade. Acceptance today is not only due to...
The Computer-Assisted Design of Multi-Ponds in Series for Stormwater Management
When a site's topography prohibits the installation of a single stormwater management pond, the drainage system can be integrated with multi-ponds in series. A computer program written...
Return to search