Test and Prediction Results for Five Spread Footings on Sand
A separate volume summarizes this prediction symposium. It is available from ASCE in New York and is entitled as listed above. This prediction event took place during the conference and...
Application of Numerical Models in the Design of Clarifiers
In this study, a numerical model of a circular clarifier was applied to reveal the effects of the water depth on the hydraulic and removal efficiency. The velocity and solids concentration...
Optimizing Secondary Clarifier Performance: A Presentation Outline
Optimizing secondary clarifier performance is an activity that involves a consideration of the design, the maintenance, and the operation of the clarifier. Although the basic shape of...
Optimization Studies of Anaerobic Expanded Bed Reactor Pretreatment of Domestic Wastewater
In recent years the advent of the anaerobic expanded bed reactor (AEBR) has made possible the treatment of wastewaters of comparatively lower strength than have traditionally been treated...
Computer simulation of pulsed pumping for remediation under mass transfer limited conditions
The article presents the computer simulation of choosing the right time periods for interruption and pumping in the pulsed pumping process. It will calculate a set of criteria under mass...
Modeling of Biofiltration of Natural Organic Matter in Drinking Water Treatment
A multi-substrate model of the biofiltration of natural organic matter in drinking water was developed and successfully applied. This model assumes that biofiltration is a two-step process...
Effect of Roughness and Thickness of Biofilms on External Mass Transfer Resistance
The effect of roughness and thickness of biofilms on the dissolved oxygen (DO) concentration boundary layer thickness (DO CBLT) and the external mass transfer process in a biofilm system...
Combining a 2-D Flood Plain Model with GIS for Flood Delineation and Damage Assessment
This paper describes potential applications of Geographical Information System (GIS) for flood hazard delineation and damage assessment. The hydraulic model simulates both 1-D flood routing...
Modelling of Flood Wave Propagation Over Flat Dry Areas of Complex Topography in Presence of Different Infrastructures
After a description of the general equations which govern the propagation of a 2D flood wave (shallow water equations), a review of the scientific publications on the integration of their...
New Methods for Modelling Dam-Break Wave
Recent developments in numerical analysis for hyperbolic equations have led to new methods which solve shallow water equations including complementary equations for hydraulic jumps. An...
Formation and Propagation of Steep Waves: An Investigative Experimental Interpretation
From the end of the last century, many Authors have studied experimentally the formation and the propagation of steep waves on dry flume bottom. Up to the present time, however, some aspects...
Using Drop Structures for Stream Gaging
A long term monitoring program of 15 watersheds, for the purpose of studying channel response to erosion control measures being constructed in north Mississippi, is being conducted by...
Laboratory and Field Evaluation of Acoustic Velocity Meters
A project is currently underway to evaluate the performance of 27 acoustic flowmeters used at Hoover, Davis, and Parker Dams on the lower Colorado River. Field surveys and laboratory testing...
Experimental Design and Measurement Techniques for Investigation of Two-Phase Flow
Discussing the relevant hydraulical and inter-phasial processes of two-phase flow in open tanks the necessary requirements for set-up and operation of physical model studies are worked...
Real-Time Data Collection of Scour at Bridges
The record flood on the Mississippi River during the summer of 1993 provided a rare opportunity to collect data on scour of the streambed at bridges and to test data collection equipment...
Calibration of Movable Bed Model for Armant Area
The morphology of the Nile River, in Egypt, is undergoing continuous changes which causes navigation bottle-necks in some local reaches. About 200 km downstream Aswan, at Armant area,...
Using the SedBed Monitor to Measure Bed Load
An acoustic distance measuring device (SedBed Monitor) was developed to accurately measure bed surface transects in a sediment and water recirculating flume. From these transects the rate...
On Measurements of Particle Spinning Motion
Investigation of particle saltation motion is crucial to the development of the theory of bed load transport. Due to the combination effects of the bed roughness and the velocity gradient,...
Response of Velocity and Turbulence to Abrupt Changes from Smooth to Rough Beds in Open-channel Flows
Response of velocity distribution and turbulence characteristics to abrupt changes of bed roughness have been investigated experimentally with two-component laser Doppler anemometer (LDA)....
Visual Investigation of Field Bed-Load Sampling
An instrument for bed load sampling was developed consisting of an underwater video camera for visual observations. This instrument is called the Delft-Nile sampler and its design, efficiency...
Return to search