Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...

Determination of Hydraulic Roughness for Concrete-Lined, Supercritical Channels
A channel verification program has been initiated by the US Army Engineer District, Los Angeles to determine the hydraulic roughness of flow in a concrete channel. Specifically, this study...

Mechanics of Debris Flows
The paper deals with the mechanics aspects of the modelling of debris flows and will focus on steady, fully developed flows. After a brief review of the types of constitutive equations...

Kenetic-theory Approach to the Nevado Del Ruiz 1985 Debris Flow
The Nevado del Ruiz 1985 debris flow was the worst disaster of its kind in this century, killing 22,000 people. By making an idealization of the debris flow material and the flow regime,...

Continuum-Mechanics-Based Rheological Formulation for Debris Flow
This paper aims to assess the validity of the generalized viscoplastic fluid (GVF) model in the light of both the classical relative-viscosity versus concentration relation and the dimensionless...

Modeling Low Flow Transport of Nonconservative Pollutants in Streams
The complex nature of low flow transport and transformation of nonconservative pollutants in natural streams has been investigated using a numerical solution of a proposed mathematical...

Repeatability and Oblique Flow Response Characteristics of Current Meters
Laboratory investigation into the precision and accuracy of various mechanical-current meters are presented. Horizontal-axis and vertical-axis meters that are used for the measurement...

Bed Shear Stress in Unsteady Open-Channel Flows
In this study, velocity distributions over smooth and rough beds were accurately measured with an LDA in unsteady open-channel flows. The log-law distributions yielded well in the wall...

Limitations of Reduced Scale Testing on Parshall Flumes
A model for the boundary layer development in the entrance section of a Parshall flume is developed to account for the effects of fluid viscosity on flume calibration equations. Data for...

Water-Level, Velocity, and Dye Measurements in the Chicago Tunnels
On April 13, 1992, a section of a 100-year-old underground freight tunnel in downtown Chicago, Illinois was breached where the tunnel crosses under the Chicago River, about 15 meters below...

Variation of Froude Number with Discharge for Large-Gradient Streams
Under chemical-control conditions, the Froude number (f) for a cross-section can be approximated as a function of the ratio R2/ 3/d...

Prediction of Gravel Transport Using Parker's Algorithm
This paper demonstrates that sediment discharge in gravel streams can be reasonably estimated by calibrating the Parker and Klingeman procedure. This paper also identifies the need for...

Riprap Incipient Motion and Shields' Parameter
Unobstructed incipient motion data from a variety of sources are compiled to re-examine current thinking regarding riprap stability. Shields' framework is investigated and relationships...

Applicability of Two Simplified Flood Routing Methods: Level-Pool and Muskingum-Cunge
Simplified flood routing models for unsteady flow simulation in reservoirs and rivers have advantages of relatively small computing requirements when compared to dynamic routing models...

Selection of ?x and ?t Computational Steps for Four-Point Implicit Nonlinear Dynamic Routing Models
A major step in a successful application of unsteady flow models based on the numerical (four-point implicit, nonlinear finite-difference) solution of the complete one -dimensional Saint-Venant...

Advanced HEC-2 Modeling on Forester Creek
The goal of this paper is to share information regarding advanced modelling techniques used to solve complex hydraulic flow issues using the HEC-2 Computer Model (1990). There are several...

Modeling Critical Depth in Open Channels
This paper explores multiple critical depths. Reasons behind and characteristics of their occurrence are reviewed. A method to determine multiple critical depths is proposed for use in...

A Numerical Model for Learning Concepts of Streamflow Simulation
Numerical models are useful for demonstrating principles of open-channel flow. Such models can allow experimentation with cause-and-effect relations, testing concepts of physics and numerical...

A Comparison Between Two Kinematic Wave Solutions for Movement of Debris Flows
We compare an asymptotic kinematic wave solution for movement of debris flows with a solution obtained by the method of characteristics. The differences between the two solutions in the...

Roll Waves in Mud Flow
Permanent roll waves on a shallow layer of fluid mud which is modeled as a power-law fluid is studied. Based on long-wave approximation, momentum integral method is applied to derive the...

 

 

 

 

Return to search