ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Systematic Design of Marinas for Ice Condtions
A systematic approach and recommendations are presented for design engineers use in planning and building safe docks and marinas, and in reducing the expense of damages which ice causes....

Berthing Impact Force Distribution on Pile Supported Pier Structures
This paper investigates the degree to which a berthing impact force is distributed to the pile bents of batter pile supported pier structures. A procedure is developed to estimate the...

Design and Construction of Marine Facilities for Ridley Island Coal Terminal
The design and construction of the wharf for 250,000 DWT bulk carriers is discussed in this paper. The terminal project was carried out on fast-track, 23 month schedule, with construction...

Port of Kismayo (Somalia) Rehabilitation
Extensive deterioration of the 2070 ft long four-berth, marginal wharf at the Port of Kismayo necessitated a major rehabilitation to maintain operations. The selected scheme was a steel...

Settlement of Shallow Foundations on Cohesionless Soils
Design and Performance
The main objectives of this book are to present some of the available techniques for estimating the settlement of shallow foundations on cohesionless soils, and to compare predicted and...

Use of In Situ Tests for Foundation Design on Clay
Years of evaluated experience with the field vane test in soft clays have resulted in empirical correction factors well suited for design practice. An extension of L. Bjerrum's...

Pressuremeter and Foundation Design
The design of shallow and deep foundations on the basis of pressuremeter results is analyzed using numerous load tests and case histories. The foundations are shallow footings subjected...

Dilatometer Tests for the Design of Grouted Piles in Rock
A case study of drilled and grouted piles in rock, which were analyzed using results of down-hole dilatometer tests is presented. The tests were performed from a jack-up platform in water...

In-Situ Testing to Characterize Electric Transmission Line Routes
A review of the literature has shown few definitive studies which separate test variability from soil inhomogeneity. A sensitivity study was performed to evaluate the effects of the overall...

Design Parameters for Grouted Piles in Rock From In-Situ Load Tests
A series of pile load tests were performed at an onshore site to develop final geotechnical parameters for the Gaviota platform foundation which consists of large diameter drilled and...

CPT/DMT QC of Ground Modification at a Power Plant
The use of 908 static cone penetration test (CPT) and 33 Marchetti dilatometer test (DMT) soundings provided the quality control (QC) needed to improve a power plant site by the use of...

Uplist Capacity of Pile Foundations Using CPT Data
Southern California Edison Company has performed field uplift load tests on concrete driven piles, cast-in-place straight shaft piles and cast-in-place belled piers along transmission...

The Pressuremeter for Foundations: French Experience
The paper presents historical information on the development of the pressuremeter and its application in the Laboratories Central des Ponts el Chaussees (LCPC). The continuous research...

Dilatometer to Compute Foundation Settlement
Sixteen examples demonstrate how the S. Marchetti dilatometer test (DMT) provides soil compressibility data for the rapid calculation of foundation settlements with an average ratio of...

3-D Flexible Embedded Machine Foundations by BEM and FEM
A study on the dynamic response of three-dimensional flexible massless foundations of arbitrary shape, embedded in a homogeneous, isotropic and linear elastic half-space and subjected...

Harmonic Vertical Pile Response in Non-Homogeneous Medium
This paper describes the application of the boundary element method to determine the steady state response of vertically loaded floating piles in a non-homogeneous medium in which the...

Vibration Isolation of Structures From Surface Waves in Layered Soil
This work deals with the problem of isolation of structures from ground transmitted surface waves generated by machine foundations. The isolation is accomplished by means of rectangular...

A Microcomputer Program for Bearing Capacity Analysis
The objective of this paper is to introduce an IBM/PC/XT/AT microcomputer program for the Bearing Capacity Analysis of Shallow Foundations. The program incorporates the bearing capacity...

The Rise of the Tall Building
The development of the high-rise frame in the U.S. was the result of a collision of many factors. The destruction of Chicago in the great fire of 1871 was one major factor in the start...

Spreadsheets: A New Design Tool
New techniques are developing which make computer programming easier. One new technique is spreadsheet programming for microcomputers. Two programs are presented which give a quick overall...

 

 

 

 

Return to search