Verification of Advanced Analysis Techniques
As a designer there is a concern over the complexity of analysis required by design specifications and building codes because it forces engineers into types of analysis for which many...

Determination of Diffusivities of Sorbing and Nonsorbing Species in Rocks
Through-diffusion experiments were performed for the sorbing and nonsorbing species in granites. Determining methods of diffusivities were discussed according to sorption properties of...

Interpretation and Modelling Process of Bedrock Structures for Site Evaluation in Finland
The repository site for the final disposal of spent nuclear fuel in Finland will be selected by the end of the year 2000. Preliminary site investigations have been made in five areas since...

Fractal Characteristics of Fracture Roughness and Aperture Data
In this study mathematical expressions are developed for the characteristics of apertures between rough surfaces. It shown that the correlation between the opposite surfaces influences...

Characterization of High Radioactive Waste in a Reprocessing Plant Using Passive and Active Neutronic Methods
In the new UP3 reprocessing plant at LA HAGUE, drums containing hulls and endpieces are produced at the end of the shearing and dissolution shop. The determination of residual fuel masses...

Evaluation of Geoscientific Information Systems for Three-Dimensional Ground-Water Modeling, Yucca Mountain, Nevada
Fully three-dimensional representations of the geologic system at Yucca Mountain have been developed using a Geoscientific Information System, which is an expansion of a traditional Geographic...

Effect of Material Heterogeneities on Flow Through Porous Media
Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations...

Unsaturated Flow Through a Variable Aperture Fracture in Topopah Spring Welded Tuff
The role of fractures in unsaturated flow through welded and nonwelded tuffaceous rocks is a fundamental question being addressed in performance assessment activities for the Yucca Mountain...

Theory of Matrix and Fracture Flow Regimes in Unsaturated, Fractured Porous Media
The flow behavior of a two-dimensional, unsaturated fracture-matrix system is characterized by a critical flux qf*...

Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...

Barometric Pumping of Contaminated Gases Through Fractured Permeable Media
Contaminated gases may be transported vertically through a fractured permeable medium by the breathing process which is associated with cyclical changes in the barometric pressure. A review...

Some Conclusions from a Biospheric Model Validation Study (BIOMOVS)
BIOMOVS (BIOspheric MOdel Validation Study) is an international co-operative effort to test biospheric models designed to calculate the environmental transfer and bioaccumulation of radionuclides...

Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...

Near-Field Transport of Radioactive Chains
Much attention has been given to predicting the near-field mass transfer of a single radioactive species from a waste solid into surrounding porous material, but only limited consideration...

Comparison of Elastic and Inelastic Analysis and Test Results for the Defense High Level Waste Shipping Cask
In the early 1980's, the U.S. Department of Energy/Defense Programs (DOE/DP) initiated a project to develop a safe and efficient transportation system for defense high level...

Three-Dimensional Groundwater Flow Modelling for a Potential Repository Site
In Finland site investigations are carried out at five places in order to find a suitable site in the Finnish bedrock for a repository for spent nuclear fuel. The aim is to model the bedrock...

Two Double Porosity Models for Groundwater Radioactive Contamination
This paper describes two models for groundwater radioactive contamination in a naturally fractured rock. The first one for a saturated rock and the other one for an unsaturated rock. Numerical...

General Circulation Models: Applications for Nuclear Waste Repositories
Numerical models have long been used to relate causal and response functions in the natural environment. Some 20 years ago, one-dimensional, multi-causal models of earth temperature evolved,...

Preliminary Assessment of the Impact of Conceptual Model Uncertainty on Site Performance
Performance assessment modeling for high-level radioactive waste (HLW) disposal incorporates three different types of uncertainty. These include data and parameter uncertainty, modeling...

A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....

 

 

 

 

Return to search