Estimation of Mean Water Depth for Border Irrigation
The mean water depth for border irrigation is derived, using dam-break simple wave solution and boundary layer theory, as a function of inflow discharge, bottom slope, bottom roughness,...
Estimating Number and Duration of On-Times for Surge Irrigation
Research shows surge flow can achieve efficient and uniform irrigation on some soils. However, most available information focuses on computerized analysis and modeling for research purposes....
The Inflatable Weir and Its Widespread Employment for Irrigation in Japan
Although introduced in the U. S. in the 1950's for groundwater recharging, the inflatable weir has become established only in Japan, in which case it is used almost entirely...
Establishing a Monitoring Program for Formulating Water Quality Objectives in a Transboundary Reach
A systematic approach to the establishment of a monitoring program for formulating water quality objectives in the Similkameen River should include the following interactive steps: 1)...
Spread Sheets for Irrigation and Drainage Projects
Land use planners as well as planners from other disciplines use overlays for site analysis but these are usually a qualitative display. Recently the advent of spread sheets coupled with...
Water Table and Salinity Movement in a Silty Clay Soil
The movement of the water table and profile salinity in a shallow drained soil in permanent pasture overlying an artesian aquifer was observed. Soil samples were taken before and after...
Modeling Branching Irrigation Canal Networks
A mathematical model of branching canal network has been developed based on solving the integrated form of Saint Venant equations which describing steady and unsteady, uniform and non-uniform...
Physical Model Verification of a Coastal Discharge
A 1:75 scale physical model of a thermal discharge into a rocky, semi-enclosed bay was verified against extensive field data. The model accurately reproduced the prototype temperature...
Theoretical Flow Model for Drop Structures
A theoretical model based on the momentum equation is reviewed for a trapezoidal weir drop structure operating in a trapezoidal channel. Preliminary qualitative results indicate agreement...
General Design for Modifications to Existing Lower Santa Ana Drop Structures
A model study conducted at the Waterways Experiment Station investigated the possibility of utilizing the existing drop structures of the Santa Ana River. Initial tests on selected existing...
Liberty Restored
The Outstanding Civil Engineering Achievement of 1987 is the restoration of the Statue of Liberty in New York Harbor. The restoration work included many engineering tasks that by themselves...
Redundancy Evaluation of Existing Bridges
The redundancy of an existing bridge can only be correctly assessed by considering the full superstructure as a single entity. Any formulation based on the analysis of bridge components...
LFRD Bridge Design as Viewed by the Designer
The load and resistance factor design (LFRD) design concept has been resisted by some bridge engineers on the grounds that it represents a reduction of the 'factor of safety'...
Evaluation of Corroded Steel Bridges
In the United States there is a large inventory of corroded steel bridges. The evaluation of these existing bridges is difficult when considering all the uncertainties involved in deterioration....
Overview of the Guidelines for T/L Structure Loadings
This section introduces a reliability based design methodology that forms the framework for the loading guidelines. A Load and Resistance Factor Design (LRFD) format is presented for the...
Three Automatically Erected Folding Spans
The U. S. Navy has identified three rapidly erected bridges. Each is capable of spanning 400 feet (120 m) with a 70 ton (63 tonne) live load at mid-span. Each will also fold into a 15...
Prediction of Deformations Due to Heat Curving
This paper summarizes the state of the art in the thermal deformation techniques. Alternate analytical methods are described. The limitations and accuracy of these models are noted, and...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Measures Against Wind-Induced Vibrations of Bridges
The design of very flexible structures, such as long-span steel bridges, are frequently governed by wind-induced vibrations. This paper introduces the present situation of the cable-supported...
Structural Systems for Multispan Cable Suspended Bridges
Multispan cable suspended bridges, i. e. , cable-stayed or suspension bridges with a large number of consecutive main spans of equal size, must be carefully designed to become economical...
Return to search