Overhauling and Opening to Traffic of a Toll Tunnel in Marseilles (France)
The city of Marseilles called for bids for overhauling and opening to traffic an old unused railway tunnel, under the very center of the city. The tender scheme was a concession. The paper...

Financing Arrangements for the Medway Crossing
This paper is concerned with the arrangements currently being planned to finance and construct a 510 metre long immersed tube road tunnel in the County of Kent in the UK. A novel arrangement...

Glacial Icemelt in the Wind River Range, Wyoming
The Wind River Range of Wyoming contains the greatest concentration of glaciers in the American Rocky Mountains with two of the larger glaciers being Dinwoody and Gannett Glaciers. This...

Observation of Sediment Resuspension in Old Tampa Bay, Florida
Equipment and methodology have been developed to monitor sediment resuspension at two sites in Old Tampa Bay. Velocities are measured with electromagnetic current meters and suspended...

The Stacked Drift Tunnel
The Mount Baker Ridge Tunnel is the first of its kind and the last: a forward thrust of technology and a look back to the flow of federal highway funds, which paid 90% of its cost. The...

Estimation of Wave Power as an Energy Resource for Hawaii
One of the most important elements in determining the wave power available by means of a wave power extracting device is the amount of wave energy present at a given location during a...

Rehabilitating West Point's Tunnel
Conrail, the Northeast's largest freight railway, had a problem with a tunnel carrying the fastest freight line between the New York area and the Pacific. The 1882 tunnel...

The Invisible Engineer
For all their contributions to society, engineers have worked largely behind the scenes, seldom remembered in the dedication ceremonies of bridges and tunnels and skyscrapers. Several...

Rochester Stops the Deluge
After a slew of stopgap waste-treatment plants failed to solve Rochester's chronic storm water and sewage overflow problem, city officials changed direction in the late 1960s....

Aussie Steel
The 50-story Chifley Square Building being built in Sydney will be the tallest Australian steel building. Scheduled for completion in June 1992 at a cost of $310 million, it will house...

Development of Hydraulic Structures
The Bureau of Reclamation was established in 1902. Since that time, Reclamation has constructed more than 220 dams. Each dam, depending on its function, has two or more principal hydraulic...

Wind Bracing
This chapter discusses the structural design of the bridge with regards to wind forces....

An Education in Tunneling
A senior civil engineer and winner of the 1988 Martin Kapp Foundation Engineering Award describes the evolution of U.S. tunneling technology and practice. Trained as a structural engineer,...

Transmission Line Structure Loading
This paper outlines specific procedures for determining loads on transmission line structure systems that can be used in the reliability based design or assessment of components of these...

Sizing Techniques for Lateral Bracing
Techniques for determining the size of lateral bracing members in multi-story steel buildings are presented and discussed. Because the design of such bracing is usually controlled by deflection...

Steel Girt Design
Procedures are presented for the design of light gage cold formed girts and hot rolled girts. The effects of continuity, sag rods, and wall sheeting are discussed. Design procedures are...

Aerodynamic Improvements for Plate-Girder Bridges
This paper describes the application of wind tunnel tests on plate-girder cable-stayed bridges to ensure that the cross-section will not be susceptible to wind-induced oscillations. Information...

Inclined-Cable Aerodynamics
A series of wind tunnel tests have been conducted to clarify the fundamental mechanism of the vibration of the inclined cables of cable stayed bridges. The influence of the cable orientation...

Lateral Force Distribution in Manufactured Housing from Full-Scale Testing
The research focused on the behavior of two manufactured 14 ? 66 ft houses under simulated wind loads. Extensive instrumentation was employed to insure the collection of data that would...

Aerodynamic Modeling of Chimneys
The wake induced acrosswind behavior of circular cross-section structures, such as industrial chimney, has been studied for many years using wind tunnel models. Due to the relaxation of...

 

 

 

 

Return to search