Optimal Collection of Data for Parameter Identification
In this paper, the author attempts to study the optimal spacing of measurements for a structural system modelled by a single-degree-of-freedom oscillator so that the variance of one or...
Dynamic Response Moments of Random Parametered Structures with Random Excitation
First and second order statistical response moments are formulated for linear multi-degree of freedom dynamical systems having both random load and random structural characteristics. A...
Rigid Body Random Rocking Prediction
The stochastic rocking of a rigid block due to shaking of its foundation is examined. The foundation is flexible (Winkler) and its independent springs and dashpots separate from the block...
Active Control of Distributed Parameters Structures by Pointwise Control Actions
Several methods have been offered to control a structure. These methods are the optimal control, the pole assignment, the independent modal space control, and the direct velocity feedback....
Bounded State Control of Structures with Uncertain Parameters
The control of linear systems in the presence of set constrained external disturbances has been investigated maintaining the states in a prespecified region by estimating the maximum reachable...
Fourth Generation Container Crane Characteristics
The specification of container crane characteristics requires the examination and identification of numerous ship and terminal operating parameters and trends to ensure that the specified...
Forensic Engineering
Learning from Failures
The activities and qualifications of the Forensic Engineer are summarized in the nine papers published in this book. Procedures for failure investigation are discussed along with failure...
Highway Quality Level Program
This article describes three versions of BASIC programs for microcomputers, prepared for the Federal Highway Administration, to calculate a statistical measure of highway quality. Using...
Plugging into a Dam
Instruments are embedded into hundreds to dams around the world. But for instrumentation to be effective, the instruments must be read, and the data must be plotted and compared to predicted...
Electrical In Situ Measurements for Predicting Behavior of Soils
A new method is presented for predicting the in situ stress-strain behavior of fine grained soils based upon in situ measurements of its electrical properties. The method involves the...
Viscoplastic Fluid Model for Debris Flow Routing
This paper describes how a generalized viscoplastic fluid model, which was developed based on non-Newtonian fluid mechanics, can be successfully applied to routing a debris flow down a...
Relative Landslide Susceptibility in Davis County, Utah?A Multivariate Approach
The complex distribution of soil properties makes prediction of slope stability extremely difficult in these mountain watersheds. The need to assess these watersheds for their susceptibility...
An Evaluation of Sediment Resuspension Parameterizations
The recent attention to managing surface water toxic substances has resulted in a number of modeling approaches, all of which to a great or lesser extent require accurate treatment of...
Rainfall-Loss Parameter Estimation for Illinois
The U. S. Geological Survey is currently conducting an investigation to estimate values of parameters for two rainfall-loss computation methods used in a commonly used flood-hydrograph...
Remote Sensing Applications in the Model of Runoff Formation in Excess of Storage
The model of runoff formation in excess of storage applied in some humid regions of China is revised in this paper, so that the model can adopt the information provided by Landsat remote...
Groundwater Quality Monitoring in the New York Metropolitan Area: Statistical Alternatives
The need for development of groundwater monitoring strategies for the New York metropolitan area with emphasis on statistical analysis has been investigated in this study. Statistical...
Use of Continuous Simulation Versus the Design Storm Concept for Water Quality
The validity of the design storm concept has been challenged by several investigators since the development of computer simulation models. Of particular interest are the studies that compare...
Estimation and Inference in the Inverse Problem
The estimation of groundwater flow and mass transport parameters is approached via maximum likelihood. Confidence intervals and hypothesis tests as well as the asymptotic properties of...
A Robustness Constraint for the Analysis of Uncertainty
A sensitivity-based definition of system robustness is presented that can be formulated as a constraint within an optimization framework. The optimization framework permits the tradeoffs...
A Perspective on Performance Variability in Municipal Wastewater Treatment Facilities
Excessive variability in effluent quality can cause wastewater treatment plants to fail to meet their discharge permit limits. This paper summarizes our understanding of the nature, causes,...
Return to search