ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Wave Calculation Using WAM Model and NMC Wind
The CYCLE 2 version of the WAM (Wave Model) model is used to hinfcast global ocean wave spectra, using the NMC (National Meteorological Center) winds, for a period of about 60 days. The...

Chaotic Advection in a Shear Layer
The developing (in time) inviscid shear layer, although not yet in its turbulent regime, displays all the characteristics of chaotic advection. The corresponding Lyapunov exponent is strictly...

Hydrodynamic Pressure on an Oscillating Vertical Plate
The hydrodynamic pressure on an oscillating vertical plate could be influenced by the effects of compressibility of fluids and surface waves. The compressibility is effective for higher...

Evolution of Nonlinear Long Waves After Interacting with a Breakwater
Three-dimensional evolution of nonlinear long waves after interacting with a straight thin breakwater is investigated in this paper. The primary interest is to apply a weakly nonlinear...

Interaction Between Waves and a Floating Body with Tension Legs
A boundary element method has been solved to the coupling problem of a two-dimensional tension leg platform interacting with a monochromatic wave train. In the boundary element calculation,...

Numerical Simulation of Dam-Breaking Waves
Recently, as a high-resolution numerical technique, the Total Variation Diminishing (TVD) method is applied to Aerodynamic shock problems successfully. In this paper, a Total Variation...

Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...

A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...

Comparative Time Domain Analysis of Some Available Analytical and Empirical Expressions for the Spatial Variability of Seismic Ground Motions
Simulations in space and time based on models for the spatial variability of seismic ground motions are generated. Displacement time histories are simulated through the spectral representation...

Time-Delayed Control of Nondispersive Continuous Systems
This paper deals with the noncollocated, time-delayed active point control of continuous systems. It considers systems of finite spatial extent which can be modelled by the undamped wave...

Buckling of Lamianted Plates Using h-p Finite Strips
The paper presents a computationally efficient alternative to the finite element method for the initial buckling analysis of long, shear-deformable composite laminates. In addition the...

A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....

A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...

Partial Hybrid Stress Element for Higher-Order Laminated Plates Theory
The partial hybrid stress method is applied to higher-order plate theory for orthotropic laminated plates. This new element performs better than displacement formulation and approaches...

Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....

Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...

Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...

A Micromechanics Model for Rough Interfaces
A new constitutive model for transfer of interfacial tractions along rough cracks in strain softening composites is presented. The model relates the normal and shearing stresses on the...

Microscopic Modeling of Shear Strength of Contaminated Soils
The degradation of shear strength of soils due to prolonged contamination of soils is an emerging problem. The experiments conducted at New Jersey institute of Technology showed a gradual...

Numerical Experiments for Anisotropic Behavior of Granular Materials
A three dimensional discrete element computer code 'TRUBAL' is used to investigate the effect of initial anisotropy on stress-strain and volume change characteristics...

 

 

 

 

Return to search