ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Computer Aided Design of Butterfly Inlet Valves
Computer simulation of butterfly inlet valves (throughflow, lattice) in hydropower schemes is presented. The software is intended for practisting engineers to obtain significant parameters...

Comparison of Joint Shear Strengths for Conventional and Roller Compacted Concrete
Direct shear test data for parent material and bonded and unbonded jointed specimens of conventional and RCC (roller compacted concrete) are presented and compared. Results are discussed...

Pull-Out Response of Geotextiles and Geogrids (Synthesis of Available Experimental Data)
During the past 15 years, there has been a considerable growth in the use of various materials to reinforce soils. The rapid development of geosynthetics and their increasing use in soil...

Controlled Yielding of the Lateral Boundaries of Soil Retaining Structures
Lateral expansion of conventional or reinforced soil backfills is necessary to establish and maintain the minimum lateral stresses on soil retaining structures. Laboratory studies are...

Mechanisms of Subsidence Induced Damage and Techniques for Analysis
Structural damage due to mining induced subsidence is a function of the nature of the structure and its position on the subsidence profile. A point on the profile may be in the tensile...

Frequency Domain Site Response with Pore Pressure
A frequency domain analysis for seismic site response and liquefaction potential is developed. The analysis is based upon a nonstationary random vibration theory. The model uses an effective...

Modeling Fatigue Crack Growth Resistance, dN/da
In the fracture mechanics approach to fatigue, da/dN is correlated with the cyclic range of the stress intensity factor, ?K; the resulting relation, da/dN=f (?K), is commonly called the...

Probabilistic Prediction of Mixed Mode Fracture Initiation and Trajectory Under Random Stresses
Methods are developed for estimating crack trajectory and the probability of crack initiation in mixed mode fracture. The analysis is based on a computer program for deterministic fracture...

Fatigue Reliability and Inspection in Redundant Structural Systems
The reliability of redundant structural systems under fatigue including updating by inspection is studied using two different formulations, i.e., the stress intensity space and the crack...

Reliability Based Analysis of Contact Problems
The S.B. Batdorf model is modified to include the reduction in shear due to the effect of compressive stresses on the crack face. This new formulation was used to obtain the probability...

Probabilistic Model for Stability of Slopes
Presented herein is a probabilistic model based on derived distributions to predict shear strength of soils and the safety factor of slopes considering uncertain properties of soil, namely:...

Effect of Spatial Variation of Ground Motions on Bridges
The effect of spatial variation of ground motions on the response of a two-span bridge is presented. Perfectly and partially correlated earthquake ground motions are used as input motions...

Bridge Repairs?Unexpected Effects on Reliability
There is a significant probability that a bridge will require repairs at some time during its service life. Repairs correcting one deficiency can cause other, unanticipated problems. Awareness...

Pressures on Prisms in Turbulent Shear Flows
Experimental results are presented which show that Melbourne's 'Small Scale Spectral Density Parameter,' S, controls the negative pressures on the...

Endochronic Theory and Non-Llinear Stochastic Dynamics of 3-D Frames
Analytical continuous expressions of the material constitutive law are required by equivalent linearization techniques in nonlinear stochastic dynamics. Extensions to study 3D frames,...

Diffusion Models of Crack Growth Due to Random Overloads
Stochastic diffusion models of crack growth are developed, reflecting uncertainty in applied loading and residual stresses near the crack tip. Applications are shown to (1) random vibration...

Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....

Monitoring the Effects of the Pipe Insertion Machine Technique
The results of an experimental study of the pipe insertion machine are presented in this paper. Strains induced in an adjacent pipeline, soil displacement, pipe deflection and vibrations...

Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...

Microstructure of Cohesive Sediment Suspensions
In a shear flow field suspended fine sediments under relatively low concentrations and stable stratification conditions develop a step-wise profile. This is due to internal wave instability...

 

 

 

 

Return to search