Thermal Effects in a Transient Study of Fracture
Studies, e.g. Zehnder and Rosakis (1989), indicate that fracture is associated with temperature rises in inelastic zones near the crack edge. To gain more insight into this phenomenon,...
Characterizing Mode I Fatigue Delamination of Composite Materials
Evaluation of two techniques to characterize fatigue delamination using the double cantilever beam (DCB) specimen are presented. The two techniques were the delamination growth onset (G-N)...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Partial Hybrid Stress Element for Higher-Order Laminated Plates Theory
The partial hybrid stress method is applied to higher-order plate theory for orthotropic laminated plates. This new element performs better than displacement formulation and approaches...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
Mechanical Behavior of Composites with Interphases
The effect of interphases on the mechanical behavior of fiber-reinforced composites is studied. Two problems, a cracked fiber in a matrix, and a fiber pulled out of a matrix, are discussed....
Theoretical and Experimental Mechanisms of Toughening in Multi-phase Materials
Multi-phase materials are an important class of materials being developed for aerospace primary structural applications. Multi-phase materials are those materials consisting of two or...
Nonlocality of Continuum Approximation of Microcracked Materials
A continuum with nonlocal damage has recently been shown to be an effective approach for the analysis of strain-softening structures. The basic idea is that only the damage, normally caused...
Micro-Damage Process Model for Polycrystalline Ice
This paper presents a micro-damage process model for freshwater polycrystalline ice deforming at the high end of the ductile-to-brittle transitional domain of strain rated. Damage is attributed...
Moisture Diffusion in Concrete and Mechanisms of Drying Creep
The Pickett effect is the excess of creep at drying over the sum of shrinkage and basic creep. Several theoretical models have been presented to speculate on the mechanisms of this effect,...
Deformation of Concrete Due to Drying
The deformation of drying concrete is numerically investigated considering the effect of random arrangement of coarse aggregates. The result indicates that a part of the statistical variation...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Instability and Plastic Flow of Soils
Materials should according to Drucker's postulate become unstable when the second increment of plastic work is negative. Experimental observations however show otherwise....
Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...
Constitutive Relations for Granular Solids Accounting for Heterogeneous Deformation Fields
Under high deviatoric stress levels corresponding to large strains, the deformation of granular media is highly heterogeneous. A micro-mechanical approach is developed here to model the...
Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...
Simulation of the Quasi-Static Deformation of 2D Assemblages of Rigid Discs
Although the importance of dilatancy in the constitutive behaviour of granular materials has been recognized for some time, conclusions about its evolution and dependence on different...
Hypermedia and its Application to Geotechnical Databases
The concept of hypermedia has the potential for greatly enhancing existing database management software. In the present paper the concept of hypermedia is briefly described, the nature...
Return to search