Prediction of Debris Flow Prone Areas and Damage
It is very important when drawing hazard maps to estimate damage to houses from debris flow of certain fixed quantities. A debris flow disaster, which occurred in Kake Town, Hiroshima...
Thermal Plumes from Staged Diffusers into a Uniform Quiescent Environment
The behavior of thermal plumes from staged multiport diffusers was investigated experimentally. The three-dimensional temperature distribution was measured by scanning thermistor rakes...
Forces Acting on a Vortex-Excited Vibrating Cylinder in Planar Oscillatory Flow
An experimental investigation into the vortex-excited vibration of a circular cylinder in planar oscillatory flow has been made with emphasis being placed on the amplification of the forces...
Modeling of Surface Vortices in Unsteady Flow
Hydraulic model studies of lock filling and emptying systems include investigating vortex tendencies at the intake vincinity during filling. The flow at the intake vicinity is unsteady...
CORMIX2: Expert System for Multiport Diffuser Discharges
The Cornell Mixing Zone Expert System (CORMIX) is a series of software systems for the analysis, prediction, and design of aqueous toxic or conventional pollutant discharges into watercourses,...
Development of Suspended Sediment Concentration Profiles
This paper deals with the adjustment of suspended sediment concentration profiles in a fully developed, steady, uniform two-dimensional turbulent open channel flow without initial sediment...
Effect of Temperature on Settling of Fine Sediments
Results from settling experiments in an annular flume using kaolinite clay in distilled water are presented. Identical experiments carried out at different temperatures show that as temperature...
A Hybrid Model for Sediment Concentration Profiles
The paper discusses the deficiency in the existing theories on suspended concentration profiles which is due to the variations of theories for modeling the velocity profiles. As can be...
Example of the Stable Channel Design Approach
This paper shows an example application of a new method being packaged by the US Army Engineer Waterways Experiment Station to aid in the design of stable flood-control channels. A stable...
Stable Channel Analytical Design Method
The Flood-Control Channels Research Program is being conducted at the US Army Engineer Waterways Experiment Station to develop systematic methods for design of stable channels for small...
Channel Network Analysis Using Simultaneous Solution Algorithm
In this paper, a simultaneous solution algorithm for one dimensional unsteady flow routing through channel networks is introduced. This direct solution algorithm is based on the double...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Riprap Stability Results from Large Test Channel
Velocity data from a large test channel were used to determine the distribution of depth-averaged velocity and shear stress on the side slope of both straight and curved channels. From...
Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...
Physical Modelling of Self Forming Alluvial Channels
A method is presented for the determination of a practicable physical model of self-forming channels in cohesionless alluvium. Both sand bed and gravel bed regime channels are considered....
Scale Effects of Overflow-Oriented Hydraulic Parameters for a High Dam
This paper presents the findings of prototype observation and model verification on the surface velocity, the range of nappe jetting, and the diffusion regime of the discharged flow related...
Characteristics of the Flood Release-Induced Vibrations with Qianshui Thin-Arch Dam
In this article the prototype observations and design analyses are described regarding the flood release-induced vibrations of the Qianshui thin-arch dam and its foundation; and their...
Conservation Properties of Flow Simulation Models
The fundamental equations of fluid mechanics and hydraulics posses certain integral properties which should be maintained by their discrete analogs. In this paper the conservation properties...
The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...
Return to search