Lessons from Hurricane Andrew's Effects on Hydraulic Structures
Documentation and description of Andrew's effects on open channels and other hydraulic structures in South Dade County, Florida, are presented, based on observations made during field...
Overland Flow Resistance Estimation from Small-Plot Data
The correct application of physical process models, such as the kinetic wave approximation to shallow overland flow, is dependent upon selection of appropriate values for parameters which...
Computer Scheduling and Construction Specs
As recently as the early 1980s, employing computers in critical path method (CPM) scheduling was a formidable decision demanding considerable commitment of time and resources by management....
Short-Span Bridge Solutions
Large bridges get most of the headlines, but the nation's huge network of small bridges (many with spans of less than 25 ft) may be more in need of replacement. Age, corrosion,...
Sediment Yields from a Watershed in Taiwan
Characteristics of suspended sediment load were investigated for Shih-Men Reservoir watershed in Taiwan. Results of the investigation showed that annual suspended sediment load was correlated...
Total Sediment Loads of Tropical Rivers
Unmeasured and total sediment discharges were computed for 107 sets of data from the Amazon and Orinoco Rivers and their major tributaries. Unmeasured loads were generally small except...
Development of the Lake Okeechobee Watershed Phosphorus Transport Model
The Lake Okeechobee watershed phosphorus model was developed to route flows and phosphorus loadings associated with point and nonpoint sources through a watershed transport system, and...
Economic Aspects of the Bureau of Reclamation Safety of Dams Program
The paper briefly examines economic aspects of the Bureau of Reclamation (Reclamation) Safety of Dams (SOD) program evaluation process. Procedures described include the downstream damage...
U.S. Geological Survey Bedload Sampling Policy
During the late 1960's, the U.S. Geological Survey's (USGS) Water Resources Division (WRD) developed the Helley-Smith bedload sampler. Since then, the USGS and the Technical Committee...
Incipient Motion in Gravel-Bed Rivers
Incipient motion processes are reviewed for bed material in gravel-bed rivers. Prediction difficulties are identified. Research results are reported for field and flume studies to investigate...
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...
A Simple and Reliable Method For Analysis of Water Supply Distribution
The proposed analysis, may be regarded as a bridge between the practical sample analysis and the optimization model development. From the analysis and observation of water distribution...
Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...
Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...
Sediment and Water Quality Control Devices in Small Watersheds
The physical behavior and health of an alluvial stream depends on the extent of man's interferences in its tributary areas. In its natural setting a stream provides three main functions...
Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...
Modern Design Concept for Composite Slabs with Ductile Behaviour
Numerous tests with different types of composite slabs have been carried out in the laboratory for constructional engineering of the University of Kaiserslautern, Germany in order to determine...
Slim-Floor Beams: Design Criteria and Structural Behaviour
Partially concrete-encased steel beams are mostly employed due to their natural resistance to fire, but there may also be other reasons, e.g. to obtain smaller depths of construction....
Comparison of Simple Calculation Methods for the Fire Design of Composite Columns and Beams
There is a need for approximate calculation methods to do the fire design of composite structures. Several of such methods for composite beams and columns have been compared to find out...
Return to search