A Model of Mixing in a Stratified Tidal Flow
We will describe a simple model of vertical mixing in a stratified tidal flow that might be observed in shallow estuary like San Francisco Bay. The model flow is driven by a specified...
Flow and Scour Near an Abutment
Laboratory experiments were used in conjunction with a two-dimensional depth-averaged numerical flow model, RBFVM-2D, to investigate the relationship between flow velocity distribution...
Scour Prediction Model at Bridge Abutments
A model to predict local abutment scour is presented. The model is based on a large number of laboratory experiments over the past half century. The dependent variable, a ratio that includes...
Computational Hydraulics?The Systems Approach
This paper introduces two modern computational hydraulic computer programs that combine the calculated subcritical and supercritical water surface profiles and pressure gradients in open...
Simulation of River Bed Evolution Below Tsengwen Reservoir in Taiwan
An uncoupled, one-dimensional river model, capable of simulating bed evolution, hydraulic sorting and armoring under unsteady flow conditions is presented in this paper. This unsteady...
On the Applicable Ranges of Kinematic and Diffusion Models in Open Channels
The kinematic and diffusion models using simplified momentum equations of the full dynamic equation have been frequently used for numerical flow simulations, because they have several...
Predicting Water Quality at Municipal Water Intakes Part 2: Application to the Southern Sacramento-San Joaquin Delta
Work in progress on developing methodologies for predicting water quality at Municipal intakes in the Sacramento-San Joaquin Delta is discussed. Principal sources of salinity are identified...
Particle Tracking Model for the Sacramento-San Joaquin Delta
A mathematical model has been developed to simulate the movement and fate of individual particles in a water column in an estuarine environment. The developed model not only keeps track...
Density Currents in Pollutant Transport and Mixing
A buoyant spreading model for the current-advected plume is formulated including several distinct mechanisms: convective spreading, interfacial friction spreading, entrainment at the density...
Criticality of Density Intrusions
Previous analyses of density intrusions indicates that a steady interface cannot be maintained if the front propagates at a speed greater than that of long interfacial waves. Supercritical...
Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...
The Separated Flow Around a Circular Bridge Pier
The unsteady separated flows around a flat plate/cylinder junction and a scour hole/cylinder junction were investigated experimentally. The flow in the plane of symmetry was presented....
Top Width of Pier Scour Holes in Free and Pressure Flow
The maximum top width of the local scour holes at piers is shown to be a simple function of the scour depth and the angle of repose of the bed material in water. Knowledge of the top width...
Preliminary Studies of Pressure Flow Scour
Bridges that become inundated during floods have slightly pressurized flow that impacts bridge piers and creates an aggravated scour condition. Results of two preliminary laboratory studies...
A Model for Vertical Transport at a Sheared Density Interface
A physically based model for vertical mixing and transport at a sheared density interface is presented, based on high-resolution measurements from laboratory experiments. It is found that...
Mixing Characteristics of a Transitional Stratified Two-Layer Flow
Small scale structures in a stably stratified two-layer flow are investigated. The flow configuration has the initial velocity interface displaced with respect to the density interface....
Erosion Protection at Hydraulic Structures: A Report From the Task Committee
In 1991 the ASCE Hydraulics Structures Committee formed a task committee on Erosion Protection at Hydraulic Structures. The purpose of the committee is to determine current practices in...
Scour Development at Isolated River-Bed Obstacles
Development of local scour was investigated for isolated obstacles on movable beds subject to clear-water scour. The resulting maximum scour depths, scour volumes, and obstacle displacements...
n Values for Shallow Flow in Rough Channels
Manning's friction factor n has been developed from flume data for very shallow open channel flow in a high-gradient channel with large bed material. n values are presented as a function...
Problems with Numerical Modeling of Gravel-Bed Rivers
Inherent to one-dimensional numerical models are the assumptions that hydraulic parameters can be assigned a characteristic average value, and that the flow is gradually varied so that...
Return to search