Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Sprayed-Zinc Galvanic Anodes for the Cathodic Protection of Reinforcing Steel in Concrete
Corrosion of reinforcing steel bars (rebars), due to penetration of chloride ions from seawater affects the substructure of many bridges in marine service. In a new, low cost control method,...
Turning on the Waterworks
A new tunnel, two pumping stations, reservoirs and 150 mi of pipe have 23 municipalities in DuPage County, Illinois awash in Lake Michigan water, ahead of schedule and under budget. Bringing...
A Face-Lift for Lincoln
The 45-year-old Lincoln Tunnel is undergoing a sweeping rehab�from its ceiling on down to its roadway. Each of the three tubes (in the world's only three-tube underwater vehicular...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Simplified Methods for Assessment of the Structural Integrity of Existing Steel Jacket Platforms in the Gulf of Mexico
This paper presents the results of research to define a practical procedure for assessment of the structural integrity of existing steel jacket platforms in the Gulf of Mexico. An overview...
Review of API Guidelines for Pipe Piles in Sand
Most offshore structures are supported using steel pipe piles which are designed in accord with API Recommended Practice 2A. The guidelines for analysis of axial capacity of steel pipe...
Homopolar Pulse Butt Welding of API 5L Line Pipe
Homopolar pulse welding (HPW) is a welding process that is being investigated as a means to rapidly join API line pipe, having particularly great potential for application in deepwater...
Fiber Ropes for Ocean Engineering in the 21st Century
Recent advances in synthetic fiber ropes will greatly influence the practice of civil engineering in the oceans during the 21st Century. New fibers have moduli almost as high as steel...
Tunnel Takes Cathodic Protection
Cathodic protection is nothing new for bridges and parking garages, but it has never been installed in a tunnel�until now. As part of a $15 million rehabilitation project, the method is...
Earthquakes: A New Look at Cracked Masonry
Economics, fears of liability, and a strict damaged-buildings repairs ordinance have contributed to an extensive delay in the repair of masonry-infill buildings in earthquake-stricken...
The Caisson Solution
Detroit is expanding its wastewater treatment plant to drastically reduce combined sewer overflows. The expansion, however, is being done on an extremely congested 4 acre tract of land...
Mining for Building Expansion
Engineers adapted mining techniques to tunnel under a vibration sensitive manufacturing operation to create new working space below. IBM workers needed more working space at their Vermont...
Cables and Anchorages
The following types of cables are generally used in cable stayed bridges: Parallel bars; Parallel seven wire strands; Parallel or semi-parallel wire cables; Locked coil strands and ropes;...
Sending Steel Down the River
Completed last October 1990, the Roosevelt Lake Bridge is now the longest two-lane, single span, steel-arch bridge in North America, spanning 1,080 ft. Also, the longest steel arch bridge...
White Steel for Osaka Bay
Wind, earthquake and aesthetics were the design determinations for Japan's Higashi-Kobe Bridge. The designers also had to consider the man-made bay infill site and a directive...
New Support for Pin-Hanger Bridges
To promote safety of their bridges, many state highway departments are considering ways to add auxiliary support to existing pin-hanger bridges. The Pennsylvania DOT and its open-end consultant...
Return to search