Moment Rotation Curves for Double Framing Angles
Moment-rotation curves for bolted framed steel connections are derived from force-deflection data obtained from laboratory tension and compression tests of angle segments. These derived...
Fracture-Mechanics-Based Fatigue Life Estimate
Fatigue lives of tee-shaped weldments are estimated using fracture mechanics concepts and crack growth rate data. Fracture mechanics is used to develop an approximate expression for stress...
Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...
Mechanical Properties of Model Ice Rubble
Experiments were conducted to measure the mechanical properties of bulk ice rubble. Tests were performed under isothermal and plane strain conditions. Fresh water ice blocks were used...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Studies With, and Testing of the McCormick Pneumatic Wave Energy Turbine With Some Comments on PWECS Systems
Work done in developing concepts for pneumatic wave energy conversion based on theoretical analyses of the hydrodynamic, pneumatic, and mechanical systems with some estimates of performance...
Selected Papers from the Chinese Journal of Geotechnical Engineering ?1985
This book contains English translations of 19 articles selected from the Chinese
Finite Element Idealization for Linear Elastic, Static, and Dynamic Analysis of Structures in Engineering Practice
This report by the Finite Element Idealization Task Committee is a comprehensive aid for modeling structures for finite element analysis. The first part covers static analysis. Aspects...
Engineering Mechanics
6th Conference
Abstract only. A collection of abstracts of papers presented at the Sixth Engineering Mechanics Specialty Conference, held in Buffalo, New York, May 20-22, 1987....
Economical Computer Controls for Low Head Hydro
Small power systems based on renewable energy sources such as low head water falls, wind, solar and ocean tides all suffer from stochastic changes in input power. Economically viable,...
Small Scale and Low Head Hydro Development in Canada: An Overview of Federal Activities and Policy
Through research and development, new small turbines have been tested and a Darrieus type vertical axis hydraulic turbine (VAHT) has been developed and field tested. Manuals for hydrologic...
Small Hydropower Potential in Missouri
The hydropower potential of small head plants on the Gasconade River was investigated. Since, it is felt that small head plants will have less environmental impact, thus it will be more...
Selection of Small Hydro Project Sites
In the course of studying nearly forty areas in Peru to identify possible sites for small hydro development and in order to select the best in each area for detailed design, the Authors...
Criteria for Selecting Turbine-Pumps Used in Mini-Hydro Power Units
The present paper is aimed at studying turbine-pump units operating at low heads. The proposed methodology is based on the global matching of the turbine and the pump so that both will...
A Marine Thruster in Small Scale Hydropower
A 70 kW hydroelectric plant utilizing a marine thruster as a turbine was commissioned in May, 1985. The thruster, the construction management, the site conditions and the testing program...
Development of Two Plants on California Canals
The projects utilize the head drop between canals on the system of the Central California Irrigation District (CCID. ) The projects utilize the elevation difference between the District's...
Low Head Hydroelectric Development on Madera Canal
The Madera-Chowchilla Power Authority with cooperation from the U. S. Bureau of Reclamation has been successful in the development of four hydroelectric plants at five head drops on the...
Two New Machines for Ultra Low-Head Hydropower
This paper outlines the development of two new types of positive displacement ultra low-head hydropower machines, the AUR Water Engine (AURWE) and the Salford Transverse Oscillator (STO)....
Crooke's Falls Small Hydro: A Case History
The paper discusses the background, financing, licensing and other aspects of hydroelectric power plant development at Crooke's Falls, Colorado....
Case Study?Wyre Wynd Hydroelectric Project
To combat rising energy costs, Southwire Company, a manufacturer of wire and cable products headquartered in Carrollton, Georgia, began generating its own electrical power at the company's...
Return to search