ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...

Checking Concrete Growth
When the Tennessee Valley Authority built its dams in the 1930s, instrumentation installed in the massive concrete detected a defect that would later cause major problems: concrete growth...

Depressing Traffic Top-Down
Top down construction will permit the City and County of Denver to maintain traffic at two congested intersections while a tunnel is driven below them. The project, which will carry Speer...

Autonomous Navigation for Structured Exterior Environments
The Telemanaged Mobile Security Station (TMSS) was developed at Sandia National Laboratories to investigate the role of mobile robotics in exterior perimeter security systems. A major...

Intelligent Excavator Control for a Lunar Mining System
The benefits of utilizing local planetary resources are a large reduction in the cost of lifting materials from the earth's surface into earth orbit. Since the moon is one of the closest...

Conceptual Design and Characteristics of A Dual-Arm Cam-Lock Manipulator
Recent developments in the area of smart structures indicate that variable geometry/stiffness truss network is of fundamental importance in designing smart transformable structures and...

Generalized Object Control and Assembly for Space Robots
This paper presents a Generalized Object Control framework which subsumes Unified Motion/Force Control and Object Impedance Control. Under this framework new forms of assembly primitives...

Drivetrain Design, Incorporating Redundancy, for an Autonomous Walking Robot
An often overlooked, though critical, component of a mobile robot is the drivetrain. To achieve the ambitious programmatic goals of an extra-terrestrial, planetary robotic explorer, a...

An Intelligent Robotic Vehicle for Lunar/Martian Applications
This paper describes the research effort being undertaken at UA/NASA Space Engineering Research Center (SERC) towards a general-purpose intelligent robotic vehicle system (IRVS) for Lunar...

The Kinematic Design of a Robotic Large Space Structure Construction Service
Researchers at the University of Maryland's Robotics Research Lab are applying a kinematic rapid proto-typing methodology to the development of a commercial robotics service for the construction...

A Novel Gravity Compensation System for Space Robots
Realistic experimental investigation of the behavior of space robots requires simulation on earth of the micro-gravity environment existing in space. This is particularly true due to the...

Real-Time Control for a Robotic Rebar Bender
Job conditions and variability in the properties of the stock material combine in a rebar bending operation to create a challenging environment for a robotic bender. This paper reports...

Robotic Options for Mining of Near-Earth Objects
The mining and processing of a Near-Earth Object (NEO) should be as simple and as robust as possible - the fewer processes and parts the better. Reliability and survivability of the total...

On the Dynamics and Control of Flexible Orbiting Systems: An Approach with Application
A relatively general formulation for studying the dynamics and control of an arbitrary spacecraft, with interconnected flexible, deployable and articulating structural members, is reviewed...

Improving Dynamic Finite Element Models Using Test Data
A structural optimization based method was developed to improve the finite element model to achieve good agreement with the test results. The modal displacements at critical locations...

Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...

Using a Small Satellite Bus As a Dedicated Platform for On-Orbit CSI Experiments
Control-Structure Integration (CSI) technology will be needed for the success of many future space missions, however, this technology will not be seriously considered for use by program...

Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...

A Conceptual Study of A Solar Power Satellite Using Centrifugal Force
We studied the self deployable Solar Power Satellite (SPS) using centrifugal force in order to explore ways in reducing construction costs. We designed a 340 kW SPS, and studied the unfolding...

Thermoelastic Theory of Cylindrical Sandwich Shells with Piezoelectric Sensors or Actuators
Cylindrical sandwich shells with piezoelectric longitudinal and ring elements bonded to the outer and inner surfaces are considered in this paper. Thermal effects are included in the analysis,...

 

 

 

 

Return to search