Fretting Corrosion on Large Split Thrust Bearing Runners
In the early fifties interfacial slip was measured on laboratory models. Design improvements, resulting from these tests, were incorporated into later machines. These improvements appreciably...
Our Municipal Water System Has Power
Hydroelectric potential exists in the Boulder, Colorado municipal water system. Excess pressure is developed in the water system because the water originates in the Rocky Mountains, west...
Frequency Domain Site Response with Pore Pressure
A frequency domain analysis for seismic site response and liquefaction potential is developed. The analysis is based upon a nonstationary random vibration theory. The model uses an effective...
Probabilistic Prediction of Pile Group Capacity
A reliability analysis of a group of free standing piles in clay is carried out using Monte Carlo simulation. The pile material strength, soil capacity, and the load on the pile group...
A Stochastic Model for Low-Cycle Elastic-Plastic Fatigue Crack Growth
In this paper a stochastic process approach is considered to represent the random nature of the low-cycle (elastic-plastic) fatigue crack growth process. A semi-Markov renewal model is...
Pore Pressure Development: Probability Analysis
The development and subsequent dissipation of excess pore pressure, p in a soil deposit subject to an external load is examined using probability concepts that account for uncertainties...
Prediction of Concrete Creep and Shrinkage by Sampling on the Basis of Correlated Random Material Parameters
There are many random parameters which influence creep and shrinkage of concrete. In all of the previous probabilistic studies the parameters are assumed to be mutually independent random...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
Time Series Analysis of Wind Pressures on Low Buildings
A new methodology for the description of local wind pressures on the building envelope of mono-sloped roof buildings by using time series analysis is described. A simple AR(1) model has...
Pressures on Prisms in Turbulent Shear Flows
Experimental results are presented which show that Melbourne's 'Small Scale Spectral Density Parameter,' S, controls the negative pressures on the...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Rainflow Cycles in Nonstationary Gaussian Processes
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up- and downcrossing rates are estimated for...
Efficient Probabilistic Structural Analysis Using an Advanced Mean Value Method
An advanced mean-value (AMV) method for probabilistic structural analysis is presented. This method blends the conventional mean value method with the advanced structural reliability analysis...
Water Distribution Network Calibration Considering Multiple Loading Conditions
Through time a water distribution network's carrying capacity is reduced as material collects on pipe walls. The impact varies with each pipe in the system and occurs at an...
Reported Results from 600 Cloud Seeding Projects
The authors conclude that cloud seeding is an effective way of increasing precipitation when applied to the appropriate clouds and climate. Reported results from research projects show...
Statistical Modeling of Space-Time Data
A common practice in hydrogeology is to draw contour lines to depict the occurrence of spatially distributed (i.e., regionalized) variables such as groundwater elevations, aquifer properties...
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
New Installation Designs for Buried Concrete Pipe
The rational development of new installation designs for buried concrete pipe is described. Over 100 analyses were performed using a new computer program named SPIDA (Soil Pipe Interaction...
Return to search