State-of-the-Art Pipe Network Optimization
Within the next decade water distribution system optimization models should become everyday tools of practicing engineers. This paper examines existing models and discusses some of the...
Optimization of Looped Water Distribution Networks
The optimization algorithm developed by G. Quindry et al. can be used to obtain a least cost pipe network for a looped water distribution system. A solution is obtained under steady state...
Pipe Network Optimization by Enumeration
The paper describes a procedure for the optimization of pipe networks which is executed entirely in the discrete pipe size/cost domain. The technique is based on exhaustive enumeration....
Water Distribution Design with Multiple Demands
An iterative procedure for the layout and design of new looped water distribution systems is pesented. The procedure is also applicable to the expansion of existing systems. The approach...
Benefits of Particle Size Management for Biological Wastewater Treatment
Particle size distributions in wastewater can be used to monitor and model the transformations that occur during wastewater treatment processes. Typical size distributions of organic contaminants...
Erosion of the Nile Delta Coast
The construction of the High Aswan Dam has resulted in a total absence of River Nile flow into the Mediterranean, and a corresponding loss of the sediment source for the Delta. However,...
Construction-Induced Dynamic Pressure and Corresponding Impact Factors for Pipelines
The Bureau of Reclamation, U. S. Department of the Interior, conducted a study which measured pressure exerted by construction scrapers on a rigid, buried, instrumented concrete slab....
Effects of Vehicles on Buried, High-Pressure Pipe
The mechanical effects of selected types of traffic on buried, high-pressure steel pipe are examined. Particularly considered is a section of the Colorado Interstate Gas (CIG) pipeline...
Effect of Shallow Trench Construction on Cast Iron Pipelines
This paper summarizes the results of three-dimensional finite element analyses to evaluate the strains and displacements sustained by 4, 6, and 8-in. (100, 150, and 200 mm)-diameter cast...
Influence of Depth-of-Cover on Pipe-Soil Interaction
A major research effort was undertaken to study the structural behavior of a natural gas pipeline under several critical service conditions. The program included a field test site near...
An Instrumented Soil-Pipe System: Automated Data Acquisition and Management
A 16-in. natural gas pipeline near Racine, Wisconsin, had been in service for some 30 years. In 1982 road widening operations on a line parallel with the pipe resulted in a heavily trafficked...
Metal and Plastic Pipelines: Design and Construction Aspects
This paper discusses design and construction aspects of four cross-country pipelines that were built in central Alberta, Canada during 1982-1983. The first two pipelines, carrying different...
Clay Pipe Installation?Advances in Load Factors
This report presents an evaluation of traditional load factor values for clay pipe and the development of a new bedding system which gives a higher load factor. Tests demonstrate that...
The Evolution of Jointing Vitrified Clay Pipe
Advances made in the jointing of vitrified clay pipe during the last half century, illustrate the concern of the clay pipe industry to provide top quality jointing methods. Early 19th...
Sewer Construction Inspection and Testing
Sewer construction testing is the final portion of the team effort that started with the goal of meeting the requirement for a sewer system for the protection of health and environment....
Investigations into the Structural Performance of Clay Pipes
Over the past 8 years, the Clay Pipe Development Association (CPDA) has commissioned non-destructive physical testing of vitrified clay pipelines. The diameters of the pipes have varied...
Unique Installation Methods for Large Interceptor in Poor Soil Conditions
The construction of approximately 1. 5 miles of a major sewer interceptor in downtown Boston encountered some unique construction challenges. The entire route required dewatering during...
Failure of a Large Reinforced Concrete Pipeline
This paper describes the damage that occurred when a landslide overloaded an 11 ft diameter reinforced concrete pipeline. The 8 ft lengths of pipe, each of 11. 5-in. wall thickness, were...
SPIDA: An Analysis and Design System for Buried Concrete Pipe
The paper presents a description of a new computerized direct design method for buried concrete pipe named SPIDA (Soil-Pipe Interaction Design and Analysis). Also the technical basis and...
Experiences in Concrete Pipeline Construction in Ontario 158-1985
The paper discusses the title subject in terms of concrete pipe fabrication methods and plants, pipe jointing and jointing materials, and construction experiences in the Province of Ontario,...
Return to search