RCC: Rehab Results
Thirty dams have been modified with roller compacted concrete in order to provide additional spillway capacity and for safe overtopping of embankment dams. In the national dam safety inspection...

Plastic Potential
Some 220,000 tons of epoxy-coated steel has been used in the construction of bridge decks since 1987, but some have raised questions about its long-term durability. New materials for prestressing...

Nondestructive Testing Role in Repair and Rehabilitation of Concrete Structures
Nondestructive testing (NDT) methods are increasingly being used to assess the condition of structural concrete. The paper discusses applications of NDT methods for forensic investigation...

Assessment and Repair of Fire-Damaged Concrete Structures
Concrete, even though it may be the most fire-resistant of all the major building materials, can be damaged by fire. Seldom does even a major fire cause total destruction, however, most...

Evaluation and Repair of Unbonded Post-Tensioned Concrete Structures
As with other forms of infrastructure, there is an ever increasing need to repair and strengthen unbonded post-tensioned concrete structures. Repairs may be necessitated for a variety...

Removal, Replacement and Rehabilitation of Concrete Slabs
The project involved existing one-way slabs experiencing severe corrosion damage. The slabs were removed and replaced while salvaging the concrete beams and frame components. Significant...

Bonded Concrete Overlays for Rehabilitation of Continuously Reinforced Concrete Pavement
As a result of the 1991 Intermodal Surface Transportation Efficiency Act (ISTEA), significant funding is now available for the rehabilitation of the nation's Interstate highway system....

Silica Fume Concrete: A Solution to Steel Reinforcement Corrosion in Concrete
This paper discusses the utilization of silica fume concrete admixture to prevent reinforcing steel corrosion. The mechanism of steel corrosion in salt impregnated concrete is described,...

Properties of Bottom Ash-Based Composite
High-calcium bottom ash, a by-product of the electric power industry, was evaluated for feasibility of use as a fine aggregate in structural grade concrete. Both fresh and hardened properties...

Morphological Analysis in Infrastructure Engineering
This paper presents applications of morphological image analysis techniques in infrastructure engineering. Emphasis is placed on pavement surface condition analysis and the classification...

Application of Radar Imaging Techniques to Concrete
Wideband radar imaging techniques have the potential of being a powerful tool in detecting steel reinforcing bars and delaminations inside concrete. The success of the method as a nondestructive...

Interactive Digital Image Feature Analysis as Applied to Cement and Concrete Microstructural Investigations
A novel procedure involves interactive chemical image analysis of separable features in the backscattered image. In this procedure a backscatter image is acquired by the image analysis...

Mechanistic Design Models of Loading and Curling in Concrete Pavements
Determination of the critical bending stress at the edge of a concrete pavement due to individual and combination effects of wheel loading and thermal curling is very crucial to any mechanistic...

Mathematical Modeling of Airport Pavements
Theories for analyzing rigid pavements are presented. The emphasis is on the choice of the proper models for the pavement and for the subgrade, and on the correct mathematical formulation...

Pavement Design Considerations for Heavy Aircraft Loading at BAA Airports
BAA operates seven airports in the United Kingdom. Two of them, Heathrow and Gatwick, handled 61 million passengers in 1991 with 543,000 air transport movements, 25% by wide-bodied aircraft....

A Novel Approach to Develop a Performance Based Test for Rutting of Asphalt Concrete
Asphalt concrete consists of compacted granular aggregates mixed with viscoelastic asphalt cement. The predictive phenomenological models had limited success in explaining the origin and...

Durability of Asphalt Mixture
Five asphalts were used in a laboratory testing program to establish a relationship between mixture properties and the binder properties. These five asphalts were used to make Florida...

Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...

Ft. Campbell Airfield Emergency Reconstruction
The air deployment from Fort Campbell, Kentucky to Saudi Arabia in support of Operation Desert Storm in the summer and fall of 1990 involved several hundred C5 and C141 aircraft loaded...

Portland Cement Concrete Apron Pavement Design Study for King Fahd International Airport in Saudi Arabia
The Federal Aviation Administration (FAA) Advisory Circular 150/5320-6C used for design of portland cement concrete (PCC) pavements for airports does not account for the site-specific...

 

 

 

 

Return to search