Development of a Visual Method to Track the Movement of Hydrogen Bubbles in a Laboratory Flume
The current study proposes a visual method for tracking the hydrogen bubbles position with time in a 2-D space. The experiment is filmed from above with a video camera. The obtained movie...

Application of a Needle Probe in Measuring Local Parameters in Air-Water Flow
In this paper, development of a double needle probe for measuring local parameters in air-water mixtures is explained. This probe is designed to measure flow velocities up to 10 m/s and...

Measurements of the Hydrodynamic Lift and Drag Forces Acting on Riprap Side Slope
Direct measurements have been made of lift and drag forces acting on a 20.1 mm spherical particle placed within the riprapped 1.5 H: 1 V side slope of a 10 m long channel which was protected...

Comparison of Current Meters Used for Stream Gaging
The U.S. Geological Survey (USGS) is field and laboratory testing the performance of several current meters used throughout the world for stream gaging. Meters tested include horizontal-axis...

The Use of Piezoelectric Film in Cavitation Research
A research program was conducted at the St. Anthony Falls Hydraulic Laboratory to investigate impulse pressures caused by the collapse of transient cavitation bubbles. The impulse pressures...

Design and Execution of Hydrodynamic Field Data Collection using Acoustic Doppler Current Profiling Equipment
Proposed major changes to the navigation channel depth in the Cape Fear River prompted an investigation of the existing hydrodynamics of the river system. The observed data are to be used...

Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...

Comparison of Headcut Advance Testing and Soil Test Results
This paper presents the results of a study conducted in a flume to determine headcut advance rates of two base soils compacted at various compaction moistures and placement energies. The...

Sandstone Materials Used as Riprap
A study was conducted to determine if sandstone materials could be potentially used as riprap. Nineteen rock samples (16 sandstone samples) were collected in six western states. The rock...

Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...

Fluvial Hydraulics of Streams and Mountain Rivers with Mobile Bed
The local hydraulic conditions concerning the incipient motion of the bed material in mountain streams are considered. Results of measurements carried out by using the radioisotope tracer...

Thresholds for Gravel and Cobble Motion
Flows necessary to initiate motion of rocks on a lateral bar along the Gunnison River in Black Canyon of the Gunnison National Monument are observed. Gravel and cobbles are painted and...

Identification of A Field Data Collection Program in Delaware Bay
Verification and the subsequent application of a numerical model requires sufficient field data to demonstrate that the model is reproducing the existing hydrodynamics of the modeled system....

Stochastic Control With Bounded Sample Paths: An Application to Reservoir Systems
The consideration of at least the first two statistical moments for the storage volumes of a reservoir system is crucial in an analysis aimed at determining the optimal operations policies...

Scour Hole Depth Downstream of the SAF stilling Basin
A Model to predict the maximum local scour depth downstream of the SAF stilling basin is presented. The model is based on stability analysis of a particle attacked by the hydrodynamic...

Comparison of Infiltration Equations Using Flooding Infiltrometer Data
Based on three flooding infiltrometer tests, 27 hydrographs produced by HEC-1 were used to compare peak discharge, time to peak, and storm runoff volume using three infiltration functions....

A Better Description of Trap Efficiency for Fine Sediment in Horizontal Settling Basins
Settling basin removes sediment from intake water and enhance the benefit of diversion works. In order to economize construction land and cost as well as for agriculture fertilization...

Assessing Stormwater Impacts
The evaluation of stormwater effects to watershed ecosystems must adopt an integrated approach due to the inherent complexity of assessing such environments, arising from the vulnerability...

Investigation of an Anisotropic k-? Model
In this paper the eddy viscosity hypothesis is abandoned and explicit expressions of Reynolds stress are deduced directly from the transport equations. Anisotropic k and ? equations are...

Summary of Highway Product Evaluation Practices and HITEC Needs Survey
This report (CERF No. 94-5012) contains the results from a survey conducted by the Civil Engineering Research Foundation (CERF), the research affiliate of the American Society of Civil...

 

 

 

 

Return to search