Air Regulated Siphons as Irrigation Canal Outlets
This paper investigates the possibility of using air regulated siphons as outlets from irrigation canals. Although a solution to a specific problem is sought, it is recognized that the...
Air Chamber Surge Tanks in High Head Hydro Plants
The U. S. Army Corps of Engineers Alaska District considered an air chamber during the design of the 'Crater Lake phase of the Snettisham Project near Juneau, Alaska. A conventional...
Update: Fluidization for Tidal Channel Maintenance
Flow emanating from perforations in a pipe under a non-cohesive media, such as sand in the coastal environment, can fluidize the overlying media. The fluidized sand can be readily moved...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
Gradation and Layer Thickness Effects on Riprap
Since riprap has become a costly and in some areas, scarce commodity, proper design maximizing the level of protection with a minimum rock size and layer thickness is an important goal....
Mechanics of Embankment Erosion During Overflow
Thousands of dams built in the United States have a potential to be overtopped by flood flows. It is necessary to understand the mechanics of embankment erosion in order to evaluate the...
Low Head Hydropower Finite Element Analysis
Finite element analysis provides a means of predicting the flow conditions resulting from the operation of a proposed hydropower facility. The results of a finite element flow analysis...
Thermodynamic Factors in Evapotranspiration
Many of the methods discussed in this paper are refinements of procedures presented in the report 'Consumptive Use of Water and Irrigation Water Requirements'...
Prediction of Deformations Due to Heat Curving
This paper summarizes the state of the art in the thermal deformation techniques. Alternate analytical methods are described. The limitations and accuracy of these models are noted, and...
The GEV Distribution in Drought Frequency Analysis
Three decades have passed since A. F. Jenkinson found the general solution to the Stability Postulate, which is the condition that all the extremes must meet, and after him that solution...
Probabilistic Models of Fatigue Crack Growth
The reliability of a structure against metal fatigue is a problem that has been of concern to engineers for a very long time. This problem was one of the first to be approached probabilistically,...
Moment Rotation Curves for Double Framing Angles
Moment-rotation curves for bolted framed steel connections are derived from force-deflection data obtained from laboratory tension and compression tests of angle segments. These derived...
Fracture-Mechanics-Based Fatigue Life Estimate
Fatigue lives of tee-shaped weldments are estimated using fracture mechanics concepts and crack growth rate data. Fracture mechanics is used to develop an approximate expression for stress...
Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...
Mechanical Properties of Model Ice Rubble
Experiments were conducted to measure the mechanical properties of bulk ice rubble. Tests were performed under isothermal and plane strain conditions. Fresh water ice blocks were used...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Studies With, and Testing of the McCormick Pneumatic Wave Energy Turbine With Some Comments on PWECS Systems
Work done in developing concepts for pneumatic wave energy conversion based on theoretical analyses of the hydrodynamic, pneumatic, and mechanical systems with some estimates of performance...
Selected Papers from the Chinese Journal of Geotechnical Engineering ?1985
This book contains English translations of 19 articles selected from the Chinese
Engineering Mechanics
6th Conference
Abstract only. A collection of abstracts of papers presented at the Sixth Engineering Mechanics Specialty Conference, held in Buffalo, New York, May 20-22, 1987....
Economical Computer Controls for Low Head Hydro
Small power systems based on renewable energy sources such as low head water falls, wind, solar and ocean tides all suffer from stochastic changes in input power. Economically viable,...
Return to search