Wetland Drainage and Streamflow Trends in Illinois
Long-term streamflow records from 30 gaging stations in Illinois were analyzed to assess the impact of wetland drainage on streamflow trends. The objective of the research was to determine...
Combined Application of HEC-1 and HEC-2 Simulation Models in Dike Safety Analysis
The potential flood impact of a breach in a dike for a large spreading-area on a nearby waste storage facility was investigated. An HEC-1 model was used for generating breach hydrographs...
Runoff Volume Frequency Estimation
An explicit formula is reported to express the volume of runoff resulting from a single rainfall event in terms of the catchment and rainfall characteristics. This formula is obtained...
Channel Routing Effects on Unit Hydrograph Shape
Channel routing effects on hydrograph shape and the interpretation of downstream unit hydrographs are examined. A new dimensionless routing parameter is presented....
Effect of Manning's Roughness Coefficient in Simulating Flow Parameters in Natural Channels
Manning's roughness coefficients are presented for three of the oldest and largest irrigation canals in Egypt. The discharges ranges from 35 to 318 m3/s....
Drought-related West Tennessee Channel Bank Failures
Massive bank failures occurred in 1988 along a 14-kilometer reach of the lower Obion River channel in Dyer County, West Tennessee where the river flows through an abandoned Mississippi...
Fluvial Recharge of Sand Mining Pit
Accuracy in modeling fluvial processes becomes increasingly important as development occurs along waterways. The FLUVIAL-12 (1, 2) model is used to simulate the recharge of sand mining...
Development of Crop Coefficients Using Lysimeters
A long term record of evapotranspiration by grass as measured with the large weighing lysimeter at the University of California at Davis provided an excellent background for the initiation...
Safety Analysis of Handset Wood Slab Formworks
A reliability index is calculated for flexural strength of a handset wood slab formwork system. Load and resistance models are based on a survey of construction loads and wood test data...
Construction Accident Analysis: The Inductive Learning Approach
This paper presents the use of inductive learning in the analysis of construction accidents. It provides a brief description of ROUGH, an inductive system based on the theory of rough...
Automation of a Truck-Mounted Drill Rig
Truck-mounted drill rigs used for soils properties investigation, foundation evaluation, ore exploration, and producing monitor and water wells typically require, because of their weight,...
Project Controls for Denver International Airport
Managing a $2 billion dollar construction program requires a unique application of tried and true control systems and provides an opportunity to innovate new methods. The Program utilizes...
Project Controls on the Channel Tunnel Project
Establishing controls for a multi-facted, multi-billion dollar, privately financed, project which is run by two organisations created solely for that one project has been a major challenge....
Design of Large Project Permit Management System
This paper provides a brief overview of the functional specifications for a Permit Tracking and Evaluation System (PTES) which is interfaced to the master schedule of design and construction...
A Framework for Reasoning About CAD Data
A system capable of reasoning about CAD data offers the opportunity to substantially improve a design or a construction plan by providing feedback about an engineer's artifact. This paper...
Integration of CAD and Knowledge-Based Systems?An AI Architecture
This research focuses on the use of CAD-KBSs integration as a tool for increasing constructability in design and accomplishing construction management functions. Beyond the drafting ability,...
Reasoning for Data Integration
Improving the inter-disciplinary communication of design and construction data is an important objective in improving the competitiveness of our construction industry. This paper discusses...
Requirements of Object-Oriented Databases for Supporting Collaborative Engineering
Object-oriented programming is gradually evolving into a popular and standard paradigm for large software application development. Typical examples include computer-aided design and engineering...
Automating Project Scheduling?A Case Study
This paper describes the on-going development of a 'finite element' based, project planning and scheduling package which uses knowledge bases, inference engines,...
An Object Oriented Design Methodology for Systems Integration ? A Research-in-Progress Report
This paper reports the progress of a research project to develop an object oriented design methodology for systems integration. The paper discusses motivation for this research, research...
Return to search