ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Environment One: A Master Plan Study for a New Scientific Research Station at the Geographic South Pole
The existing research station at the geographic South Pole is approaching the end of its useful life. This master plan study focuses on determining the technical and functional requirements...

Analysis of Waterbody Surface Heat Exchange
The Edinger-Duttweiler-Geyer (EDG) approach for estimating heat exchange at a water surface was examined and its applicability to ice-covered waterbodies determined. The EDG linearized...

Preliminary Results of Direct Tension Tests on First-Year Sea Ice Samples
We present the initial results of our tests to determine the tensile behavior of columnar sea ice over a range of temperatures extending from -20 to -3?C and strain rates of 10^-5...

Size Effects in the Fracture of Quasi-Brittle Materials
Causes and influences of the structural size effect that is exhibited by materials such as concrete, mortar, ice rock and ceramics, are discussed. The size effect law, which models this...

Wind Power in Antarctica?Case Histories of the North Wind HR3 Wind Turbine
The combination of extreme weather conditons and remoteness of the Antarctic sites makes them even better suited for wind turbine installations since the alternative power sources are...

Procedure for Seismic Evaluation and Design of Small Bore Piping
Simplified methods for the seismic design for small bore piping in nuclear power plants have been used for many years. Various pipe designers have developed unique methods to treat the...

Introduction to Structural and Mechanical Failure Modes for Nuclear Power Facilities
The three papers presented in this section discuss the types of information (i.e., dynamic tests, earthquake experience and analytical data) which are used in predicting the capacity of...

Containment Capacity and Failure Modes Beyond Design Basis Conditions
Analytical and experimental studies have shown that containments can at least sustain two to three times design pressures. Under the severe accident overpressure loading, experimental...

Low-Rise Shear Wall Failure Modes
A summary of the data that are available concerning the structural response of low-rise shear walls is presented. These data will be used to address two failure modes associated with shear...

Failure Modes of Flat Bottom Vertical Storage Tanks
Flat bottom vertical storage tanks are important components in essential nuclear power plant safety systems. Data on the seismic capacity and failure modes of such tanks have been identified,...

Multiple Event Considerations for Postclosure Seismic Hazard Evaluations at Yucca Mountain, Nevada
Postclosure waste canister design requirements suggest the values used for seismic design have less than a 10% chance of being exceeded in a 1,000 year postclosure period. Considerably...

Weapons Test Seismic Investigations at Yucca Mountain
Yucca Mountain, located on and adjacent to the Nevada Test Site, is being characterized as part of an ongoing effort to identify a potential high-level nuclear waste repository. This site...

The Processing of Simulated High-Level Radioactive Waste Sludges Containing Nitrites and Mercury
The reaction of formic acid with simulated alkaline sludge containing mercury and nitrite was studied in an engineering-scale facility. Quantification of offgas production was performed,...

Properties of Solidified HLW and Their Changes Under Storage and Disposal Conditions
The paper gives the results of the studies of the properties of different solidified high level waste (HLW) - vitreous (phosphate and borosilicate) composites as well as glass ceramics...

Nondestructive Testing Using Borehole and Surface Seismic Techniques to Evaluate Rock Mass Damage Zones
A suite of seismic tests was performed at the U12g tunnel at the Nevada Test Site. The methods include borehole (crosshole and downhole) and surface (Rayleigh wave and refraction) tests....

Field Investigations for Seismic Effects on Mechanical and Geohydrologic Response of Underground Structures in Jointed Rock
An exploratory Seismic Rock Mechanics research program has been initiated by the U.S. Nuclear Regulatory Commission at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to study...

Variation of Permeability with Temperature in Fractured Topopah Spring Tuff Samples
Fractures will play an important role in the near-field hydrology of a nuclear-waste package in a mined repository. Our previous studies showed that the water permeability of fractured...

Potential ?⁴CO₂ Releases from Spent Fuel Containers at Yucca Mountain
The potential release of gaseous ¹⁴CO₂ from small perforations in spent fuel containers has been evaluated...

Cask Systems Development Program Seal Technology
General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the U.S. Code of Federal Regulations Part 71 (10 CFR 71). Seals that...

General Circulation Models: Applications for Nuclear Waste Repositories
Numerical models have long been used to relate causal and response functions in the natural environment. Some 20 years ago, one-dimensional, multi-causal models of earth temperature evolved,...

 

 

 

 

Return to search