Some Remarks on BK-Models for Fatigue Crack Growth
The choice of a model parameter for concentrating the entire uncertainties of a constant load amplitude fatigue crack growth process is shown to be sufficient when reproducing the first...
Wavefront Propagation in Random Granular Media
A very brief account is given of a stochastic method developed for analysis of transient waves propagating in one-dimensional random granular-type media. The method is suited to study...
Fatigue/Fracture Reliability and Maintainability of Structural Systems: A Method of Analysis
Fatigue and fracture of structural components are the principal modes of failure for those structural systems that are dominated by tensile dynamic (oscillatory) loads. As the structure...
A New Probabilistic Model for the Fracture Toughness of Concrete
Scatter of strength and toughness parameters as well as scale effect are often observed in brittle materials such as concrete. The recently developed Crack Diffusion Model is utilized....
Probabilistic Particle-Related Constitutive Model for Clayey Material
Particle-related (microscopic) soil modeling has attracted attention of research community in recent years, because of complication and shortcoming associated with inelastic macroscopic...
Stochastic Modeling of Short Fiber Reinforced Composites?A Review
Since the early 1960's, an extensive research and development has been carried out with fiber reinforced cements and concretes. Modeling of such heterogeneous material is still in the...
Optimal Configuration for Fiber Reinforced Composites under Uncertainties of Material Properties and Loadings
Fiber reinforced composite structures could be designed by selecting proper fiber orientation in structures to suit specified desires for strength, stiffness or other mechanical properties....
Critical Buckling Load Statistics of an Uncertain Column
The objective of this paper is to examine the statistics of the buckling load of a column with uncertain material properties. The elastic modulus is assumed to be a random process that...
Hydrological Aspects of Droughts
Two hydrologic aspects of droughts are investigated in this study as a part of the work conducted for the task committee on water management during droughts. In the first part a monthly...
Soil Moisture and Runoff?Another Look
Infiltrometer studies conducted on numerous soil types in various locations of the United States which had soil moisture data were used to calculate the runoff Curve Number (CN) of both...
Hydrogeotechnical Considerations for the Disposal of Oil Shale Solid Waste Material
Laboratory tests and five large scale lysimeters (7.3?3.0?3.0 m deep) have been constructed to collect information and data on hydrogeotechnical factors which affect an oil shale solid...
A Monumental Task
The geotechnical consultants, structural engineer and contractor combined to overcome difficult soils, underground subway structures and buried utilities when building the foundations...
Pile Lateral Load Test in the Port of Los Angeles
Recent wharf projects in West Coast ports have featured rock dikes to contain backland fill and the use of vertical piles embedded in the rock dikes to resist lateral loads. This paper...
Measured Fill Performance at Berths 212-215 in the Port of Los Angeles
This paper summarizes the performance of an instrumentation fill constructed in open water in the Port of Los Angeles (Port). A new container-handling facility was constructed that consisted...
Historic Seawalls of the Boston Harbor, Massachusetts Region: Evolution, Construction and Repair
The earliest seawalls in the Boston region were of crib construction. Cobb cribs had an open framework and could readily be floated into position and sunk with rock from local sources....
Interpreting Dredge Material Bioassay Data?COBIAA
Two types of sediment bioassays may be conducted in the regulatory evaluation of dredged material, toxicity tests and bioaccumulation tests. COBIAA (for the Consequences of Bioaccumulation...
Engineering Aspects of Wetland Design
Successful wetland enhancement, restoration, or creation projects require integration of desired wetland functions, local hydrologic and soil conditions, and biological requirements into...
Engineering Mechanics
This proceedings,
Use of the Break-Off Method for the Evaluation of High Performance Concrete
The Break-Off test is one of the recent developments for testing in-place concrete strength. This research was undertaken to investigate the reliability of the Break-Off test as a measure...
Application of SMA Technology in Georgia
In 1991, the Georgia Department of Transportation participated in a cooperative effort with the Federal Highway Administration to conduct one of a series of field evaluations of Stone...
Return to search