Fracture Mechanics Applied to Geotechnical Engineering
This proceedings,
Ground Failures Under Seismic Conditions
This proceedings,
In-Situ Deep Soil Improvement
This proceedings,
Under Cover
The impermeable properties of flexible membrane liners have made them hot properties for landfill closure-cover systems. But slip-resistant clay might still be the best cover material...
Jet Grouting Gains
Jet grouting, a soil stabilization technology developed in Europe, was introduced in the U.S. in the early 1980s. Due, in part, to the use of inappropriate equipment, jet grouting got...
Short Aggregate Piers Defeat Poor Soils
A short aggregate pier system, developed to provide an economical alternative to the overexcavation/replacement technique, has been used used since 1988 to control settlement of structures...
DSM Saves the Dam
The Miami Conservancy District built five flood control dams after the catastrophic flood of 1913 in Dayton, Ohio. Lockington Dam was one of these five hydraulic fill structures. The Ohio...
Settlement Analysis
The U.S. Army Corps of Engineers Manual, Settlement Analysis, presents guidelines for calculation of vertical displacements and settlement of soil under shallow foundations. As soil is...
Scoping the Monitoring Instrumentation to Meet Repository Design and Construction Needs
This paper discusses categories of instruments that are available and recommended for consideration to monitor the engineering performance and interactions of the geologic media, groundwater,...
Banking on a Bridge
Completing the geotechnical design for the approach embankments and foundations for the Charter Oak Bridge, which crosses the Connecticut River between Hartford and East Hartford, Conn.,...
Input for Seismic Design of Major Structures
Effective seismic input considering the soil-structure interaction or soil-pile-structure interaction is presented. This approach takes the seismic wave as primitive input and considers...
New Methods to Characterize Site Amplification
Methods alternative to spectral ratios are introduced to characterize site amplification. The methods are developed by using a range of models, from the simple constant amplification model...
Dynamic Field Response Studies and Earthauqke Instrumentation of the Meloland Road Overcrossing
Ambient vibration data was obtained at the Meloland Road Overcrossing near El Centro in California by The California Department of Transportation (CALTRANS) as part of a 1978 Federal Highway...
Dynamic Soil-Foundation Interaction at the Meloland Road Overcrossing
Forced vibration tests, using a hydraulic ram device, were conducted on the Meloland Road Overcrossing (MRO) bridge over Interstate 8 near El Centro, California. Dynamic response data...
Seismic Analysis of Meloland Road Overcrossing Using Calibrated Structural and Foundation Models
A detailed seismic analysis of the Meloland Road Overcrossing is being implemented to study the response of this bridge during the 1979 Imperial Valley Earthquake. This analysis is based...
Tension Pile Test
The California Department of Transportation is conducting FULL SCALE AXIAL LOAD TESTS of 34 piles. This research project/proof test is being jointly conducted by public agencies (Caltrans...
Testing of Concrete Permeability for Durability Evaluation
Field and laboratory permeability tests are being performed to evaluate the durability of concrete in Florida. These tests are part of an extensive research program to develop a durability...
A Reduced Order Model for the Seismic Analysis of Building-Soil Systems
A finite element based, reduced order, numerical model has been developed for the nonlinear analysis of building-soil systems. The reduced order system model employs an equivalent continuum...
Ductility Analysis of Overload and Settlement
The concept of sufficient ductility to avoid premature or brittle failures is gaining wide acceptance in structural engineering and is an important aspect in mitigating the consequences...
Effects of Earthquake Intensities and Site Conditions on the Reliability of RC Frame Structures
This paper evaluates the effects of seismic zone factors and site coefficients on the seismic reliability of reinforced concrete frame structures. A nine-story intermediate moment-resisting...
Return to search